KASQSite safety, in the crew's language
Start free

KASQ › Docs › Product docs

Dropped object risk

Any tool, fitting or component that could fall on somebody — when writing a RAMS, planning a lift, or standing under work at height and seeing no tethers on the tools.

Who it is for

Supervisors and RAMS writers planning work at height or a lift, and anyone deciding how far back to keep people from work overhead.

In the office

Type what the thing weighs and how far it could fall — or drag a finger across the chart and watch the numbers move. KASQ gives you the DROPS verdict for a person underneath: slight, minor, major or fatality, from the published DROPS Calculator, transcribed line for line and checked against its own worked examples. Beside it, the things that make a crew look up: how fast it arrives, and what it hits like. Pin a result, change the weight or the height, and see the two side by side. Read it in six languages and download the report as a PDF.

On site

The suggested exclusion radius is a site rule of thumb — drop height ÷ 3, four metres minimum, rounded up to the half metre a worker can pace out. Confirm it against your own RAMS before marking out a barrier.

A worked example

A 2 kg hammer falling 12 metres strikes with about 235 joules: the DROPS consequence is a fatality. A 0.5 kg spanner from 6 metres carries about 29 joules: slight, a first-aid case.

For both, the suggested exclusion radius is 4 metres — 12 ÷ 3 is 4, and 6 ÷ 3 is 2, raised to the 4-metre minimum.

What it never does

It never allows for the object: no wind, no air resistance, no shape, no material — the speed is a release from rest under gravity alone, so drag makes the real figure lower. It is not the DROPS bounce-zone tool.

What it counts

What one run counts against a plan's monthly questions is on the tool's page and in the tools overview, both written from the same table as the plans page.

This page as markdown · for AI tools: llms.txt · llms-full.txt