KASQ › Tools › Dropped object risk
Dropped object risk
Any tool, fitting or component that could fall on somebody — when writing a RAMS, planning a lift, or standing under work at height and seeing no tethers on the tools.
No card, no expiry. Looking needs no account — using does.
Who it is for
Supervisors and RAMS writers planning work at height or a lift, and anyone deciding how far back to keep people from work overhead.
In the office
Type what the thing weighs and how far it could fall — or drag a finger across the chart and watch the numbers move. KASQ gives you the DROPS verdict for a person underneath: slight, minor, major or fatality, from the published DROPS Calculator, transcribed line for line and checked against its own worked examples. Beside it, the things that make a crew look up: how fast it arrives, and what it hits like. Pin a result, change the weight or the height, and see the two side by side. Read it in six languages and download the report as a PDF.
On site
The suggested exclusion radius is a site rule of thumb — drop height ÷ 3, four metres minimum, rounded up to the half metre a worker can pace out. Confirm it against your own RAMS before marking out a barrier.
A worked example
A 2 kg hammer falling 12 metres strikes with about 235 joules: the DROPS consequence is a fatality. A 0.5 kg spanner from 6 metres carries about 29 joules: slight, a first-aid case.
For both, the suggested exclusion radius is 4 metres — 12 ÷ 3 is 4, and 6 ÷ 3 is 2, raised to the 4-metre minimum.
What it never does
It never allows for the object: no wind, no air resistance, no shape, no material — the speed is a release from rest under gravity alone, so drag makes the real figure lower. It is not the DROPS bounce-zone tool.
What it costs
This tool calls no model and spends nothing: it is free on every plan. All plans and prices →
The other tools
- Site advisor — An HSE advisor on every site
- Toolbox talks — From HSE guidance, in the crew's language
- RAMS review — A risk assessment and method statement, checked 12 ways
- Build a RAMS — A first draft from one sentence and three answers
- CPP compatibility — Your RAMS against the construction phase plan
- COSHH assessment — From the product's safety data sheet
- Hand-arm vibration — A HAVS calculator on HSE's points
- Noise exposure — The day's noise added up HSE's way
- Take 5 / POWRA — A point-of-work risk assessment
- Kit check — The site equipment register, scanned by QR
- Site register — Crew, certificates, the 3 Strikes board
- Site audit — A walk, photos, a PDF report
- Site signs — 85 signs, print and laminate