KASQSite safety, in the crew's language
Start free

KASQ › Tools › Hand-arm vibration

Hand-arm vibration

Add the site's vibrating tools, get each one's daily trigger time on HSE's points, and give the crew a board they can scan to log their day.

No card, no expiry. Looking needs no account — using does.

Who it is for

Site managers, supervisors and whoever keeps the vibration records for crews using breakers, grinders, drills and compactors — and the operatives, who log their own day from a phone.

In the office

Add the site's vibrating tools — from each tool's own manual, where KASQ reads the declared vibration figure and checks it, or typed in by hand. It works out how long each may run in one person's hands in a day using HSE's points system, rounding points up, never down. Type the site's name and the email the records should come back to, then print two things: a board for the wall with a QR code on it, and a weekly record card, one per worker.

On site

A worker scans the code and the page opens on their phone with those tools already on it, in English, Polish, Romanian, Lithuanian or Bulgarian. They tap what they used and for how long; the page adds up their points and tells them where they stand against the action value and the limit. One tap sends the day, as a one-page sheet in English, from their own phone to the address printed on the board.

A worked example

A breaker with a declared 14 m/s² scores 392 points an hour: it reaches the 100-point exposure action value in 15 minutes and the 400-point exposure limit value in 61. A grinder at 7 m/s² scores 98 points an hour and reaches the action value after 61 minutes.

One person's day of 20 minutes on the breaker and an hour on the grinder adds up to 229 points — an A(8) of 3.8 m/s², at or above the action value and under the limit. The board in the cabin shows each tool's times beside it.

Example — made by KASQ from one hand-held breaker at 12 m/s², 10 November 2026

The record card

Personal exposure record — one week. AUDIT Site 1. AUDIT hand-held concrete breaker, 12.0 m/s². On this tool alone: 1 h 23 min maximum today. Past 21 min tell your supervisor.

The free calculator’s answer to the same figure

{
  "tool": "havs",
  "build": {
    "api": "PUBLIC-TOOLS-V1-2026-11-09",
    "core": "HAVS-CORE-V1-2026-08-07"
  },
  "inputs": {
    "magnitude_ms2": 12
  },
  "result": {
    "points_per_hour": 288,
    "minutes_to_eav": 20.833333333333336,
    "minutes_to_elv": 83.33333333333334,
    "eav_ms2": 2.5,
    "elv_ms2": 5,
    "eav_points": 100,
    "elv_points": 400
  },
  "method": "Points per hour = (magnitude ÷ 2.5)² × 100 ÷ 8, minutes to the exposure action value (2.5 m/s² A(8), 100 points) and the exposure limit value (5 m/s² A(8), 400 points) = (2.5 or 5 ÷ magnitude)² × 480, and for a given trigger time A(8) = magnitude × √(minutes ÷ 480), as in HSE's hand-arm vibration exposure calculator.",
  "source": {
    "document": "HSE L140 Hand-arm vibration (The Control of Vibration at Work Regulations 2005), and HSE's hand-arm vibration exposure calculator (version 6.3, September 2023)",
    "url": "https://www.hse.gov.uk/pubns/books/l140.htm"
  },
  "disclaimer": "The decision stays with the competent person. This calculation uses the published method and the figures you gave it; it has not seen the site."
}

Sources named in this example

What it never does

It never measures a worker's actual vibration exposure. It works from the tool's declared figure, and it is not health surveillance.

KASQ keeps no copy of what the worker types — the sheet leaves their own phone, by its own mail or messaging app, and never passes through our server. The record is the email that arrives in your office.

What it costs

One run counts as 5 of the Free plan's 30 questions a month — about 6 a month, free, no card. Reading the figure out of a tool's manual is the counted part; typing a figure in, the board, the record card and the crew's phone page are free. All plans and prices →

The other tools