KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Reducing noise from screw compressors

Current. Last checked with HSE on 11 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
11 November 2026

What it says, in HSE's own words

The problem Screw compressors providing an air supply for the aeration tanks in the blower house of a sewage treatment works were exposing maintenance engineers to A-weighted noise levels of about 100 dB. Although acoustic enclosures over each of the three blowers were effectively containing casing and drive noise, the air intake was being piped in from a filter outside the enclosure. Therefore noise generated inside the blower itself was passing into the inlet pipework and then escaping into the blower house.
The noise had a strong tonal content appearing with a peak at the lower end of the frequency range, in this case in the 63 Hz octave band. The solution As conventional absorptive silencers were inefficient at these frequencies and disproportionately large, the solution was to fit a reactive silencer into each air intake pipe. The strong noise components in the 63 and 125 Hz octave band, indicating strong harmonic content, meant that a twin-chamber design was required.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This case study describes noise from screw compressors supplying air to aeration tanks at a sewage treatment works. Maintenance engineers were exposed to A-weighted noise levels of about 100 dB. Acoustic enclosures contained casing and drive noise, but noise from inside the blowers escaped through the air-intake pipework. The noise had a strong tonal content, with a peak in the 63 Hz octave band. Conventional absorptive silencers were inefficient at these frequencies, so a reactive silencer was fitted in each air-intake pipe. Each twin-chamber silencer addressed the fundamental frequency and principal harmonic frequencies. The cost was £900 per silencer (1995). Noise was reduced overall by 20 dB, including 37 dB at 63 Hz and 30 dB at 125 Hz.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

To studium przypadku opisuje hałas pochodzący ze sprężarek śrubowych dostarczających powietrze do zbiorników napowietrzających w oczyszczalni ścieków. Inżynierowie utrzymania ruchu byli narażeni na poziomy hałasu ważone charakterystyką A wynoszące około 100 dB. Obudowy akustyczne ograniczały hałas obudowy i napędu, lecz hałas z wnętrza dmuchaw wydostawał się przez przewody doprowadzające powietrze. Hałas miał silną składową tonalną, ze szczytem w paśmie oktawowym 63 Hz. Konwencjonalne tłumiki absorpcyjne były nieskuteczne przy tych częstotliwościach, dlatego w każdym przewodzie doprowadzającym powietrze zamontowano tłumik reaktywny. Każdy tłumik dwukomorowy ograniczał częstotliwość podstawową i główne częstotliwości harmoniczne. Koszt wynosił £900 za tłumik (1995). Hałas zmniejszono ogółem o 20 dB, w tym o 37 dB przy 63 Hz i o 30 dB przy 125 Hz.

Machine-translated summary (Romanian)

Acest studiu de caz descrie zgomotul provenit de la compresoare cu șurub care furnizau aer rezervoarelor de aerare de la o stație de tratare a apelor uzate. Inginerii de întreținere erau expuși la niveluri de zgomot ponderate A de aproximativ 100 dB. Incintele acustice conțineau zgomotul carcasei și al acționării, dar zgomotul din interiorul suflantelor scăpa prin conductele de admisie a aerului. Zgomotul avea o componentă tonală puternică, cu un vârf în banda de octavă de 63 Hz. Amortizoarele absorbante convenționale erau ineficiente la aceste frecvențe, astfel că în fiecare conductă de admisie a aerului a fost montat un amortizor reactiv. Fiecare amortizor cu două camere trata frecvența fundamentală și principalele frecvențe armonice. Costul a fost de £900 pentru fiecare amortizor (1995). Zgomotul a fost redus în total cu 20 dB, inclusiv cu 37 dB la 63 Hz și cu 30 dB la 125 Hz.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.