KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Reducing noise in a dump truck

Current. Last checked with HSE on 15 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
15 November 2026

What it says, in HSE's own words

The problem The cabs of large dump trucks operating on mineral working and construction sites were found to have A-weighted noise levels of about 95 dB. The cabs were situated immediately beside the engine compartments and separated from them by plain sheet steel bulkheads. The vehicle construction itself was one of an all-welded, undamped steel plate that resulted in noise and mechanical vibration emissions from the engine and gearbox.
A three-fold approach to noise reduction was taken: the large surface areas of the cab, roof, bulkhead and door panels were treated by the application of 10 mm thick bitumastic damping pads to reduce resonant vibration; a proprietary sound barrier mat consisting of a lead/fibreglass laminate was applied to the floor and engine bulkhead; an acoustically absorptive foam was applied to all available surfaces inside the cab to reduce reverberant sound build-up. The cost About £1500 (a new vehicle can cost over £200 000). (1995) The result A noise reduction of up to 11 dB.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Large dump truck cabs operating on mineral working and construction sites were found to have A-weighted noise levels of about 95 dB. The cabs were beside the engine compartments and separated by plain sheet steel bulkheads, while the all-welded, undamped steel plate construction produced noise and mechanical vibration from the engine and gearbox. Noise reduction used three measures: 10 mm thick bitumastic damping pads on large cab, roof, bulkhead and door panels; a lead/fibreglass laminate sound barrier mat on the floor and engine bulkhead; and acoustically absorptive foam on all available surfaces inside the cab. The cost was about £1500 (1995), and noise reduction was up to 11 dB.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Stwierdzono, że kabiny dużych wywrotek pracujących w zakładach wydobywczych i na placach budowy miały poziomy hałasu ważone charakterystyką A wynoszące około 95 dB. Kabiny znajdowały się obok komór silników i były oddzielone od nich zwykłymi stalowymi przegrodami z blachy, natomiast całkowicie spawana, niewytłumiona konstrukcja ze stalowych płyt powodowała hałas i drgania mechaniczne silnika oraz skrzyni biegów. Zastosowano trzy środki redukcji hałasu: bitumiczne podkładki tłumiące o grubości 10 mm na dużych powierzchniach kabiny, dachu, przegrody i paneli drzwi; matę dźwiękochłonną z laminatu ołowiano-włóknistego na podłodze i przegrodzie silnika; oraz piankę pochłaniającą dźwięk na wszystkich dostępnych powierzchniach wewnątrz kabiny. Koszt wyniósł około £1500 (1995), a redukcja hałasu sięgnęła 11 dB.

Machine-translated summary (Romanian)

S-a constatat că cabinele autobasculantelor mari care operau în exploatări minerale și pe șantiere de construcții aveau niveluri de zgomot ponderate A de aproximativ 95 dB. Cabinele erau amplasate lângă compartimentele motorului și separate de acestea prin pereți despărțitori simpli din tablă de oțel, iar construcția din plăci de oțel complet sudate și neamortizate producea zgomot și vibrații mecanice de la motor și cutia de viteze. Pentru reducerea zgomotului au fost folosite trei măsuri: plăcuțe bituminoase de amortizare cu grosimea de 10 mm pe suprafețele mari ale cabinei, acoperișului, peretelui despărțitor și panourilor ușilor; un covor-barieră fonică din laminat de plumb și fibră de sticlă pe podea și peretele despărțitor al motorului; și spumă fonoabsorbantă pe toate suprafețele disponibile din cabină. Costul a fost de aproximativ £1500 (1995), iar reducerea zgomotului a fost de până la 11 dB.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.