KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Active/absorptive silencer for a rotary blower

Current. Last checked with HSE on 12 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
12 November 2026

What it says, in HSE's own words

The problem Cross-section of a silencer Rotary blowers often produce high levels of sound at discrete frequencies, related to the rotational speed of the unit. If these discrete frequencies are at the low end of the spectrum they may be difficult to attenuate. Traditional absorptive silencers work well at middle and high frequencies but their performance drops off below 250 Hz. Reactive silencers can be used but these can impart significant back pressure on the process and so waste energy.
In addition, reactive silencers cannot follow changes in the frequency of the noise and may also contain chambers in which unwanted material can accumulate, which could affect the performance of the silencer. The solution Active and absorptive attenuation The introduction of a hybrid active silencer did not impede the air flow and had absorptive packing for the high frequencies and active attenuation for the lower frequencies. The aim of using both methods together is to reduce noise levels from the whole spectrum of frequencies. The cost From £3000.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Rotary blowers can produce high sound levels at discrete frequencies linked to rotational speed, and low frequencies may be difficult to attenuate. Traditional absorptive silencers perform well at middle and high frequencies but less well below 250 Hz. The solution was a hybrid active silencer that did not impede air flow, using absorptive packing for high frequencies and active attenuation for lower frequencies. It reduced discharge noise by 42 dB. Cost: From £3000. (1995). Equipment was manufactured by Digisonix Inc, USA.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Dmuchawy rotacyjne mogą wytwarzać wysoki poziom dźwięku przy dyskretnych częstotliwościach związanych z prędkością obrotową, a niskie częstotliwości mogą być trudne do wytłumienia. Tradycyjne tłumiki absorpcyjne działają dobrze przy średnich i wysokich częstotliwościach, ale gorzej poniżej 250 Hz. Rozwiązaniem był hybrydowy tłumik aktywny, który nie ograniczał przepływu powietrza, wykorzystujący wypełnienie absorpcyjne dla wysokich częstotliwości i aktywne tłumienie dla niższych częstotliwości. Zmniejszył hałas na wylocie o 42 dB. Koszt: Od £3000. (1995). Urządzenie zostało wyprodukowane przez Digisonix Inc, USA.

Machine-translated summary (Romanian)

Suflantele rotative pot produce niveluri ridicate de sunet la frecvențe discrete legate de viteza de rotație, iar frecvențele joase pot fi dificil de atenuat. Amortizoarele absorbante tradiționale funcționează bine la frecvențe medii și înalte, dar mai puțin bine sub 250 Hz. Soluția a fost un amortizor activ hibrid care nu a împiedicat fluxul de aer, folosind umplutură absorbantă pentru frecvențele înalte și atenuare activă pentru frecvențele joase. A redus zgomotul de evacuare cu 42 dB. Cost: De la £3000. (1995). Echipamentul a fost fabricat de Digisonix Inc, USA.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.