KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Silencing pressure vessel discharges

Current. Last checked with HSE on 15 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
15 November 2026

What it says, in HSE's own words

The problem A firm producing fibre mouldings for the automotive industry made use of a number of fibre pulp header tanks, pressurised to ensure a constant flow to the pulp presses. As the level of pulp in a tank was replenished, air pressure rose until a pre-set limit was reached, at which point the pressurised air was released to the atmosphere through a 50 mm port. This discharge contained moisture and, occasionally, some pulp from the header tank.
The tanks were located in working areas of the factory, exposing employees every 10 minutes to A-weighted noise levels of about 101 dB for about 3 to 4 seconds. The solution The solution was to install an absorptive jet discharge silencer, approximately 2 m long, onto the pressure vessel discharge.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This case study covers noise from the discharge of pressurised fibre pulp header tanks at a firm producing fibre mouldings for the automotive industry. As pulp levels were replenished, air pressure rose until a pre-set limit was reached, releasing pressurised air through a 50 mm port. Employees were exposed every 10 minutes to A-weighted noise levels of about 101 dB for about 3 to 4 seconds. The solution was an absorptive jet discharge silencer, approximately 2 m long, with straight-through construction, moisture and pulp protection, and removable connections for periodic internal cleaning. The cost was £400 per unit. (1995)

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

To studium przypadku dotyczy hałasu podczas odprowadzania powietrza ze zbiorników wyrównawczych na miazgę włóknistą pod ciśnieniem w firmie produkującej wypraski z włókien dla przemysłu motoryzacyjnego. W miarę uzupełniania poziomu miazgi ciśnienie powietrza rosło do chwili osiągnięcia ustalonego limitu, uwalniając sprężone powietrze przez otwór 50 mm. Pracownicy byli narażeni co 10 minut na poziomy hałasu ważone według charakterystyki A wynoszące około 101 dB przez około 3 do 4 sekund. Rozwiązaniem był absorpcyjny tłumik wylotowy strumienia, o długości około 2 m, z konstrukcją przelotową, ochroną przed wilgocią i miazgą oraz demontowalnymi połączeniami do okresowego czyszczenia wewnętrznego. Koszt wynosił £400 za sztukę. (1995)

Machine-translated summary (Romanian)

Acest studiu de caz acoperă zgomotul produs la evacuarea aerului din rezervoarele colectoare presurizate pentru pastă fibroasă ale unei firme care produce piese turnate din fibre pentru industria auto. Pe măsură ce nivelul pastei era completat, presiunea aerului creștea până la atingerea unei limite prestabilite, eliberând aerul presurizat printr-un orificiu de 50 mm. Angajații erau expuși la fiecare 10 minute la niveluri de zgomot ponderate A de aproximativ 101 dB timp de aproximativ 3 până la 4 secunde. Soluția a fost un amortizor absorbant pentru evacuarea jetului, de aproximativ 2 m lungime, cu construcție directă, protecție împotriva umezelii și a pastei și racorduri demontabile pentru curățarea internă periodică. Costul era de £400 pe unitate. (1995)

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.