KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Reducing noise when loading dump trucks

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
13 November 2026

What it says, in HSE's own words

The problem During quarrying, A-weighted noise levels of 96 dB can be produced when the shovel or conveyor drops its first loads of material onto the bare metal of the body of dump trucks. The solution One company carrying out large-scale quarrying operations reduced noise levels by lining the bodies of its 20-tonne dump trucks with abrasion-resistant rubber. Sheets 50 mm thick were used, and moulded so that a profiled section of 200 mm overall depth was obtained. The sheets were then attached mechanically to the body of the truck.
Trucks were loaded by emptying a series of large shovels, each carrying up to 5 tonnes of material. The force of the impact, previously borne by the bearings, was now absorbed by the lining. The cost £26 000 per truck. In an industry where each vehicle can cost over £250 000, any extension in service life is valuable. (1995) The result The lining reduced noise levels by 14 dB. The treatment also significantly increased truck body life. Source Information supplied by Trellex Limited.

Quoted from HSE. Open the original on hse.gov.uk

Key points

During quarrying, A-weighted noise levels of 96 dB can be produced when a shovel or conveyor drops its first loads of material onto the bare metal body of a dump truck. One company reduced noise by lining the bodies of its 20-tonne dump trucks with abrasion-resistant rubber. Sheets 50 mm thick were moulded to provide a profiled section of 200 mm overall depth and attached mechanically to the truck body. Trucks were loaded with large shovels, each carrying up to 5 tonnes of material; the lining absorbed the impact force previously borne by the bearings. The cost was £26 000 per truck (1995). Noise fell by 14 dB and truck body life significantly increased.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Podczas wydobycia mogą powstawać poziomy hałasu ważone A wynoszące 96 dB, gdy koparka ładowarkowa lub przenośnik zrzuca pierwsze ładunki materiału na gołą metalową powierzchnię nadwozia wywrotki. Jedna firma zmniejszyła hałas, wykładając nadwozia swoich wywrotek 20-tonne odporną na ścieranie gumą. Arkusze o grubości 50 mm uformowano tak, aby uzyskać profilowany przekrój o całkowitej głębokości 200 mm, a następnie przymocowano je mechanicznie do nadwozia ciężarówki. Wywrotki ładowano dużymi koparkami ładowarkowymi, z których każda przewoziła do 5 tonnes materiału; wykładzina pochłaniała siłę uderzenia wcześniej przenoszoną przez łożyska. Koszt wynosił £26 000 za ciężarówkę (1995). Hałas zmniejszył się o 14 dB, a trwałość nadwozia ciężarówki znacznie wzrosła.

Machine-translated summary (Romanian)

În timpul exploatării carierelor, se pot produce niveluri de zgomot ponderate A de 96 dB atunci când un excavator sau un transportor descarcă primele încărcături de material pe metalul neacoperit al caroseriei unui autobasculant. O companie a redus zgomotul căptușind caroseriile autobasculantelor sale de 20-tonne cu cauciuc rezistent la abraziune. Foile cu grosimea de 50 mm au fost modelate pentru a obține o secțiune profilată cu adâncimea totală de 200 mm și apoi au fost fixate mecanic de caroseria camionului. Autobasculantele erau încărcate cu excavatoare mari, fiecare transportând până la 5 tonnes de material; căptușeala absorbea forța impactului suportată anterior de rulmenți. Costul era de £26 000 pentru fiecare camion (1995). Zgomotul a scăzut cu 14 dB, iar durata de viață a caroseriei camionului a crescut semnificativ.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.