HSE web guidance, updated 7 March 2025
Reducing noise in crew cab road vehicles
Current. Last checked with HSE on 11 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 7 March 2025
- HSE's date
- 7 March 2025
- Last checked
- 11 November 2026
The passage you were sent
What it says, in HSE's own words
The problem Noise levels in crew-carrying road vehicles can be high enough to cause concern. In some untrimmed vehicles such as refuse collectors, A-weighted levels have been measured as high as 103 to 105 dB. One local authority operating a fleet of such vehicles commissioned a noise reduction exercise to determine whether it would be reasonably practicable to effect a significant reduction without compromising the vehicle's road worthiness. The primary source of noise came from the engine.
However, the cabin was also subjected to noise from the transmission and hydraulic power pack coming through the relatively lightweight sheet steel floor and toe plates and the rear bulkhead. The solution This secondary noise was reduced by securing a lead/fibreglass laminate sheet to the underside of all floor, toe and bulkhead surfaces. Reverberation was also reduced by lining the roof and all available internal surfaces of the doors and the front and rear bulkheads with an expanded acoustic polyurethane foam faced with a washable porous PVC film. The cost About £1300.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This case study covers reducing noise in crew-carrying road vehicles, where noise levels can be high enough to cause concern. In some untrimmed vehicles, such as refuse collectors, A-weighted levels were measured as high as 103 to 105 dB. The primary source was the engine, with additional noise from the transmission and hydraulic power pack passing through the floor, toe plates and rear bulkhead. Noise was reduced by securing a lead/fibreglass laminate sheet to the underside of these surfaces, and by lining the roof and available internal door and bulkhead surfaces with expanded acoustic polyurethane foam faced with washable porous PVC film. The cost was about £1300. (1995), producing a reduction of 4 to 9 dB.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
To studium przypadku obejmuje ograniczanie hałasu w pojazdach drogowych przewożących załogę, w których poziomy hałasu mogą być wystarczająco wysokie, aby budzić obawy. W niektórych nieobudowanych pojazdach, takich jak śmieciarki, zmierzone poziomy ważone A wynosiły aż od 103 do 105 dB. Głównym źródłem był silnik, a dodatkowy hałas ze skrzyni biegów i agregatu hydraulicznego przechodził przez podłogę, płyty podnóżków i tylną przegrodę. Hałas ograniczono przez przymocowanie laminatu ołowiowo-włóknisto-szklanego do spodniej strony tych powierzchni oraz wyłożenie dachu i dostępnych wewnętrznych powierzchni drzwi i przegród ekspandowaną akustyczną pianką poliuretanową pokrytą zmywalną porowatą folią PVC. Koszt wyniósł około £1300. (1995), uzyskując ograniczenie o 4 do 9 dB.
Machine-translated summary (Romanian)
Acest studiu de caz tratează reducerea zgomotului în vehicule rutiere care transportă echipaje, în care nivelurile de zgomot pot fi suficient de ridicate pentru a cauza îngrijorare. În unele vehicule nefinisate, cum ar fi mașinile de colectare a deșeurilor, nivelurile ponderate A au fost măsurate până la 103 până la 105 dB. Sursa principală a fost motorul, iar zgomotul suplimentar provenit de la transmisie și agregatul hidraulic de putere trecea prin podea, plăcile pentru picioare și peretele despărțitor posterior. Zgomotul a fost redus prin fixarea unei foi laminate din plumb și fibră de sticlă pe partea inferioară a acestor suprafețe și prin căptușirea plafonului și a suprafețelor interioare disponibile ale ușilor și pereților despărțitori cu spumă poliuretanică acustică expandată, acoperită cu o folie PVC poroasă lavabilă. Costul a fost de aproximativ £1300. (1995), obținându-se o reducere de 4 până la 9 dB.
Check your RAMS against this document
Related guidance
- Reducing noise in a dump truck
- Damping compounds on heavy plates
- Reducing noise when loading dump trucks
- Reducing pump noise by good maintenance
Tell me when HSE changes this
Tell me when HSE changes Reducing noise in crew cab road vehicles. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.