KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 7 March 2025

Reducing combustion noise by flow control

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 7 March 2025
HSE's date
7 March 2025
Last checked
13 November 2026

What it says, in HSE's own words

The problem Typical A-weighted noise levels generated by a dryer oven, used in malting grain, reached up to 95 dB. A low-frequency 'boom' at a tone of 82 Hz dominated. As the boom occurred only at low firing, it was diagnosed as flame instability that developed into an oscillation at a resonant frequency of the combustion tube. The precise cause of the instability was determined to be an excessively weak ratio of fuel to air at low firing.
To overcome this problem, a motor-controlled valve, previously used for controlling weld fume extraction, was adapted and fitted to the combustion fan intake. Triggered by a micro-switch, the valve was used to reduce the air flow at low loads and so improve the combustion characteristics. The cost £100 per unit. (1995) The result An overall noise reduction of about 8 dB with the low-frequency tone being reduced by 21 dB. The bought-in units had no effect on operations, could be retrofitted and satisfied hygiene requirements. Source Consultants were Industrial Noise and Vibration Centre.

Quoted from HSE. Open the original on hse.gov.uk

Key points

A dryer oven used in malting grain generated typical A-weighted noise levels of up to 95 dB, dominated by a low-frequency ‘boom’ at 82 Hz. The boom occurred only at low firing and was diagnosed as flame instability developing into an oscillation at the combustion tube’s resonant frequency; the precise cause was an excessively weak fuel-to-air ratio at low firing. A motor-controlled valve, adapted from equipment previously used to control weld fume extraction, was fitted to the combustion fan intake. Triggered by a micro-switch, it reduced air flow at low loads and improved combustion characteristics. The cost was £100 per unit. (1995). Noise fell by about 8 dB overall and by 21 dB for the low-frequency tone.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Suszarnia używana do słodowania ziarna wytwarzała typowe poziomy hałasu ważone charakterystyką A do 95 dB, zdominowane przez niskoczęstotliwościowy „pomruk” o częstotliwości 82 Hz. Pomruk występował tylko przy niskim spalaniu i został zdiagnozowany jako niestabilność płomienia rozwijająca się w oscylację przy częstotliwości rezonansowej rury spalania; dokładną przyczyną był nadmiernie słaby stosunek paliwa do powietrza przy niskim spalaniu. Zawór sterowany silnikiem, przystosowany ze sprzętu wcześniej używanego do sterowania odciągiem dymów spawalniczych, zamontowano na wlocie wentylatora spalania. Uruchamiany mikrowyłącznikiem zmniejszał przepływ powietrza przy małych obciążeniach i poprawiał charakterystykę spalania. Koszt wynosił £100 za sztukę. (1995). Hałas zmniejszył się ogółem o około 8 dB, a niskoczęstotliwościowy ton o 21 dB.

Machine-translated summary (Romanian)

Un cuptor de uscare folosit la malțificarea cerealelor genera niveluri tipice de zgomot ponderate A de până la 95 dB, dominate de un „bubuit” de joasă frecvență la 82 Hz. Bubuitul apărea doar la ardere redusă și a fost diagnosticat ca instabilitate a flăcării care se dezvolta într-o oscilație la frecvența de rezonanță a tubului de combustie; cauza precisă a fost un raport excesiv de slab între combustibil și aer la ardere redusă. O supapă controlată de un motor, adaptată de la echipamente folosite anterior pentru controlul extracției fumului de sudură, a fost montată la admisia ventilatorului de combustie. Declanșată de un microîntrerupător, aceasta reducea debitul de aer la sarcini reduse și îmbunătățea caracteristicile combustiei. Costul era de £100 pe unitate. (1995). Zgomotul a scăzut cu aproximativ 8 dB în total, iar tonul de joasă frecvență cu 21 dB.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.