KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 20 January 2026

Water jetting

Current. Last checked with HSE on 12 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 20 January 2026
HSE's date
20 January 2026
Last checked
12 November 2026

What it says, in HSE's own words

The task Removing damaged or weathered concrete surfaces. The problem The deck and side walls of a reinforced concrete road bridge had decayed to the extent that surface repairs were needed. The top few centimetres of concrete needed to be removed and replaced with new material. The traditional method of removing the old material is to use hand-held pneumatic breakers, which can expose workers to typical vibration magnitudes of 12 m/s 2 for about 3 hours per day.
The use of percussive tools can also damage the reinforcement bar, which then has to be repaired or replaced, and cause cracking in the base concrete which may weaken the structure. The operators work to a specified depth, often unnecessarily removing sound material and leaving areas of deep damaged material. The surface also requires thorough cleaning before new concrete can be applied. The job would have taken about 60 worker days with the breakers, as well as additional time to repair the reinforcement bar and other damage.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This page describes using a robot-mounted water jetting machine to remove damaged or weathered concrete surfaces from a reinforced concrete road bridge. Traditional hand-held pneumatic breakers can expose workers to typical vibration magnitudes of 12 m/s 2 for about 3 hours per day, damage reinforcement bar and crack the base concrete, while operators may remove sound material and leave deep damaged material. The job would have taken about 60 worker days with breakers, plus repair time. The extremely high pressure water jet removes concrete up to a certain strength, regardless of depth, leaving good material and removing damaged material. Operators are not exposed to any hand-arm vibration; reinforcement and base concrete remain unaffected, the surface is ready for new concrete, adhesion is better and airborne dust levels are very low.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Ta strona opisuje użycie maszyny do hydrodynamicznego czyszczenia zamontowanej na robocie do usuwania uszkodzonych lub zwietrzałych powierzchni betonowych ze zbrojonego betonowego mostu drogowego. Tradycyjne ręczne młoty pneumatyczne mogą narażać pracowników na typowe wartości drgań 12 m/s 2 przez około 3 godziny dziennie, uszkadzać pręty zbrojeniowe i powodować pękanie betonu podłoża, podczas gdy operatorzy mogą usuwać zdrowy materiał i pozostawiać głęboko uszkodzony materiał. Praca zajęłaby około 60 osobodni przy użyciu młotów, plus czas na naprawy. Strumień wody pod niezwykle wysokim ciśnieniem usuwa beton do określonej wytrzymałości, niezależnie od głębokości, pozostawiając dobry materiał i usuwając uszkodzony materiał. Operatorzy nie są narażeni na żadne drgania przenoszone na ręce i ramiona; zbrojenie i beton podłoża pozostają nienaruszone, powierzchnia jest gotowa na nowy beton, przyczepność jest lepsza, a poziomy pyłu unoszącego się w powietrzu są bardzo niskie.

Machine-translated summary (Romanian)

Această pagină descrie utilizarea unei mașini de jet de apă montate pe un robot pentru îndepărtarea suprafețelor de beton deteriorate sau degradate de pe un pod rutier din beton armat. Spărgătoarele pneumatice manuale tradiționale pot expune lucrătorii la magnitudini tipice ale vibrațiilor de 12 m/s 2 timp de aproximativ 3 ore pe zi, pot deteriora barele de armare și pot provoca fisurarea betonului de bază, în timp ce operatorii pot îndepărta materialul sănătos și pot lăsa material deteriorat în profunzime. Lucrarea ar fi durat aproximativ 60 de zile-lucrător cu spărgătoarele, plus timpul suplimentar pentru reparații. Jetul de apă la presiune extrem de ridicată îndepărtează tot betonul până la o anumită rezistență, indiferent de adâncime, lăsând materialul bun și îndepărtând materialul deteriorat. Operatorii nu sunt expuși la vibrații transmise sistemului mână-braț; barele de armare și structura betonului de bază rămân neafectate, suprafața este imediat pregătită pentru aplicarea betonului nou, aderența este mai bună, iar nivelurile de praf din aer sunt foarte scăzute.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.