KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 20 January 2026

Diamond wire cutting

Current. Last checked with HSE on 17 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 20 January 2026
HSE's date
20 January 2026
Last checked
17 November 2026

What it says, in HSE's own words

The task Removal of sections of brick or concrete structures. The problem As part of the refurbishment of a railway station, a new stairwell was to be cut through the top of a brick arched tunnel. Directly above the tunnel there was a solid floor, which was 1 m thick in the middle of the tunnel and 4 m thick at the sides. The aperture was to be cut through all of this material across the full 7 m width of the tunnel for a length of approximately 3 m. This job could have been done with hand-held pneumatic breakers.
However, to avoid damage to the base structure, only low-powered units could have been used and the job would involve from 40 to 60 worker days of work. As tools of this type produce typical vibration magnitudes in the range 5 to 20 m/s 2 and may be used for long periods, vibration exposures of 7 m/s 2 A(8) or greater are possible. The solution The aperture was made with a large percussive breaker mounted on an excavator.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Diamond wire cutting covers the removal of sections of brick or concrete structures. The example concerns cutting an aperture through a brick arched tunnel, where using hand-held pneumatic breakers could have required from 40 to 60 worker days and created possible vibration exposures of 7 m/s 2 A(8) or greater. The solution was to cut through the brickwork along the edges with a diamond wire saw, isolating delicate parts of the structure, then use a large percussive breaker mounted on an excavator. Pilot holes were drilled with a clamp-mounted diamond core drill. Operators were not exposed to vibration from cutting or drilling, and the work took a total of 3 days.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Cięcie liną diamentową obejmuje usuwanie fragmentów konstrukcji z cegły lub betonu. Przykład dotyczy wycięcia otworu w ceglanym sklepieniu tunelu, gdzie użycie ręcznych młotów pneumatycznych mogłoby wymagać od 40 do 60 dni roboczych pracowników i powodować możliwe narażenie na drgania o wartości 7 m/s 2 A(8) lub większej. Rozwiązaniem było przecięcie muru wzdłuż krawędzi za pomocą piły z liną diamentową, odizolowanie delikatnych części konstrukcji, a następnie użycie dużego młota udarowego zamontowanego na koparce. Otwory prowadzące wywiercono za pomocą zamocowanej zaciskiem wiertnicy z diamentowym wiertłem koronowym. Operatorzy nie byli narażeni na drgania podczas cięcia ani wiercenia, a prace trwały łącznie 3 dni.

Machine-translated summary (Romanian)

Tăierea cu fir diamantat acoperă îndepărtarea unor secțiuni din structuri de cărămidă sau beton. Exemplul se referă la tăierea unei deschideri printr-o boltă de tunel din cărămidă, unde folosirea ciocanelor pneumatice portabile ar fi putut necesita de la 40 la 60 de zile de muncă ale lucrătorilor și ar fi putut crea expuneri la vibrații de 7 m/s 2 A(8) sau mai mari. Soluția a fost tăierea zidăriei de-a lungul marginilor cu un ferăstrău cu fir diamantat, izolând părțile delicate ale structurii, apoi folosirea unui spărgător percutant mare montat pe un excavator. Găurile pilot au fost perforate cu un burghiu carotier diamantat montat cu o clemă. Operatorii nu au fost expuși vibrațiilor de la tăiere sau perforare, iar lucrările au durat în total 3 zile.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.