KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 20 January 2026

Directional drilling avoids trenching

Current. Last checked with HSE on 11 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 20 January 2026
HSE's date
20 January 2026
Last checked
11 November 2026

What it says, in HSE's own words

The task Laying new utility mains. The problem The traditional method for laying utilities, eg water, gas and telephone lines, is to dig an open trench over the full length of the job and place the pipe in the trench in sections. The trenching operation causes considerable disruption and mess, and can be expensive. Road and pavement surfaces need to be broken up and reinstated using percussive tools. Workers are exposed to typical vibration magnitudes in the range 5 to 20 m/s 2 for an average of 3 hours per day.
Pipes for a new water main were laid without trenching across a motorway in northern England. The utility company hired a contractor who used directional drilling to lay the pipe. This technique, which can be used in areas with soft ground, involves digging a pit at each end of the pipe run and driving a steerable boring tool horizontally underground from one pit to the other. The head of the tool is steered from the surface using a mobile transmitter. After the boring is complete, the new pipe is pulled back through the hole.

Quoted from HSE. Open the original on hse.gov.uk

Key points

The document describes laying new utility mains by directional drilling instead of digging an open trench over the full length of the job. Traditional trenching causes disruption and mess, can be expensive, requires road and pavement surfaces to be broken up and reinstated using percussive tools, and exposes workers to typical vibration magnitudes of 5 to 20 m/s 2 for an average of 3 hours per day. A utility company hired a contractor to use directional drilling, involving pits at each end, a steerable boring tool driven horizontally underground, and pulling the new pipe through the completed hole. The risk of disturbing other buried utilities can be avoided by following HS(G)47, Avoiding danger from underground services. The method costs about 75% of full trenching, reduces vibration exposure to 15 minutes per day and takes about 25% of the time.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Dokument opisuje układanie nowych głównych przewodów sieci użytkowych za pomocą wiercenia kierunkowego zamiast kopania otwartego wykopu na całej długości robót. Tradycyjne kopanie wykopu powoduje zakłócenia i bałagan, może być kosztowne, wymaga rozbicia i odtworzenia nawierzchni dróg i chodników przy użyciu narzędzi udarowych oraz naraża pracowników na typowe poziomy drgań od 5 do 20 m/s 2 przez średnio 3 godziny dziennie. Przedsiębiorstwo użyteczności publicznej zatrudniło wykonawcę do zastosowania wiercenia kierunkowego, obejmującego wykopy na obu końcach, sterowalne urządzenie wiertnicze prowadzone poziomo pod ziemią oraz przeciągnięcie nowej rury przez gotowy otwór. Ryzyku naruszenia innych zakopanych instalacji można zapobiec, stosując HS(G)47, Avoiding danger from underground services. Metoda kosztuje około 75% pełnego kopania wykopu, skraca narażenie na drgania do 15 minut dziennie i zajmuje około 25% tego czasu.

Machine-translated summary (Romanian)

Documentul descrie instalarea unor conducte principale noi pentru utilități prin foraj direcțional, în locul săpării unui șanț deschis pe întreaga lungime a lucrării. Săparea tradițională a șanțului provoacă perturbări și mizerie, poate fi costisitoare, necesită spargerea și refacerea suprafețelor drumurilor și trotuarelor cu ajutorul uneltelor percutante și expune lucrătorii la magnitudini tipice ale vibrațiilor de 5 până la 20 m/s 2 timp de 3 ore pe zi în medie. Compania de utilități a angajat un antreprenor pentru a folosi forajul direcțional, care implică săparea unor puțuri la fiecare capăt, conducerea orizontală subterană a unei unelte de foraj orientabile și tragerea conductei noi prin gaura finalizată. Riscul de deranjare a altor utilități îngropate poate fi evitat urmând HS(G)47, Avoiding danger from underground services. Metoda costă aproximativ 75% din săparea completă a șanțului, reduce timpul de expunere la vibrații la 15 minute pe zi și durează aproximativ 25% din acest timp.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.