KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 20 January 2026

Paint-on material avoids scabbling

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 20 January 2026
HSE's date
20 January 2026
Last checked
13 November 2026

What it says, in HSE's own words

The task Preparing cast concrete for adhesion to new material. The problem Large concrete structures are generally cast in stages by pouring liquid concrete into fabricated moulds. To ensure correct adhesion between stages it is necessary to roughen, or scabble, the mating surfaces of the hardened concrete. On one site, needle guns that exposed operators to vibration magnitudes of more than 9 m/s 2 were sometimes used for this operation for nearly 2 hours per day. The solution The company used a retarder.
This is a material which can be painted onto the inside of the mould in the areas where scabbling would have been necessary. This prevents the surface concrete from curing so that the top few millimetres of material can be removed with a standard pressure washer after removal of the mould, leaving a surface ideal for adhesion. The material can be used safely by following the handling instructions on the safety data sheets supplied by the manufacturer. Removing excess material with jet washer The result There is no vibration exposure for the operators.

Quoted from HSE. Open the original on hse.gov.uk

Key points

The document describes preparing cast concrete so new material adheres, and a retarder used instead of scabbling with needle guns. The retarder is painted inside the mould where scabbling would have been necessary, preventing the surface concrete from curing. After the mould is removed, the top few millimetres can be removed with a standard pressure washer, leaving a surface ideal for adhesion. The material can be used safely by following the handling instructions on the safety data sheets supplied by the manufacturer. The result is no vibration exposure for operators, increased productivity and reduced cost, with reduced noise and dust exposure.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Dokument opisuje przygotowanie odlewanego betonu, aby nowy materiał dobrze przylegał, oraz opóźniacz stosowany zamiast skuwania pistoletami igłowymi. Opóźniacz nanosi się wewnątrz formy w miejscach, w których skuwanie byłoby konieczne, zapobiegając twardnieniu betonu powierzchniowego. Po usunięciu formy kilka górnych milimetrów można usunąć standardową myjką ciśnieniową, pozostawiając powierzchnię idealną do przyczepności. Materiału można bezpiecznie używać, przestrzegając instrukcji postępowania zawartych w kartach charakterystyki dostarczonych przez producenta. Rezultatem jest brak narażenia operatorów na drgania, większa wydajność i niższy koszt oraz mniejsze narażenie na hałas i pył.

Machine-translated summary (Romanian)

Documentul descrie pregătirea betonului turnat pentru ca materialul nou să adere și un retardator folosit în locul scobirii cu pistoale cu ace. Retardatorul este aplicat în interiorul formei, în zonele în care scobirea ar fi fost necesară, împiedicând întărirea betonului de la suprafață. După îndepărtarea formei, primii câțiva milimetri de material pot fi îndepărtați cu un aparat standard de spălare sub presiune, lăsând o suprafață ideală pentru aderență. Materialul poate fi utilizat în siguranță urmând instrucțiunile de manipulare din fișele cu date de securitate furnizate de producător. Rezultatul este lipsa expunerii operatorilor la vibrații, productivitate crescută și cost redus, precum și expunere redusă la zgomot și praf.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.