HSE web guidance, updated 7 July 2025
Operator training provided by a breaker manufacturer
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 7 July 2025
- HSE's date
- 7 July 2025
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
A manufacturer of vibration-reduced pneumatic paving breakers made vibration measurements in real working conditions and found that the vibration exposures were highly dependent on the way the machines were operated.
Let the weight of the tool do the work and don't grip too tightly; Move the cutting tool every 8-10 seconds (the amount of concrete broken is about the same after 10 seconds as after one minute); Stop the breaker when lifting it to change position because the vibration is high when pulling up on the handles; When cutting concrete, take small 'bites' to prevent the cutting tool jamming; remove concrete in shallow layers.
Quoted from HSE. Open the original on hse.gov.uk
Key points
A manufacturer of vibration-reduced pneumatic paving breakers measured vibration in real working conditions and found that exposure depended greatly on how the machines were operated. Its training material told operators to select and maintain the correct cutting tool, keep the handles horizontal, let the tool’s weight do the work, avoid gripping too tightly, move the cutting tool every 8-10 seconds, stop the breaker before changing position, and take small bites when cutting concrete. Untrained operators lifted the breaker without switching it off and worked continuously for about a minute. Training reduced average vibration from about 9 m/s 2 to around 7 m/s 2 and approximately 5.5 m/s 2, increased time before exposure action and limit values were reached, and enabled up to 17 times more concrete to be broken without increasing vibration exposures.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Producent pneumatycznych młotów brukarskich o zmniejszonych drganiach zmierzył drgania w rzeczywistych warunkach pracy i stwierdził, że narażenie w dużym stopniu zależało od sposobu obsługi maszyn. Jego materiały szkoleniowe mówiły operatorom, aby wybierali i utrzymywali właściwe narzędzie tnące, utrzymywali uchwyty w pozycji poziomej, pozwalali, by ciężar narzędzia wykonywał pracę, nie chwytali zbyt mocno, przesuwali narzędzie tnące co 8-10 sekund, zatrzymywali młot przed zmianą pozycji oraz wykonywali małe ugryzienia podczas cięcia betonu. Nieprzeszkoleni operatorzy podnosili młot bez wyłączania go i pracowali nieprzerwanie przez około minutę. Szkolenie zmniejszyło średnie drgania z około 9 m/s 2 do około 7 m/s 2 i około 5.5 m/s 2, wydłużyło czas do osiągnięcia wartości działania i wartości granicznych narażenia oraz umożliwiło rozbicie do 17 razy większej ilości betonu bez zwiększania narażenia na drgania.
Machine-translated summary (Romanian)
Un producător de ciocane pneumatice pentru pavaje cu vibrații reduse a măsurat vibrațiile în condiții reale de lucru și a constatat că expunerea depindea în mare măsură de modul în care erau operate mașinile. Materialul său de instruire le indica operatorilor să selecteze și să mențină unealta de tăiere corectă, să țină mânerele în poziție orizontală, să lase greutatea uneltei să facă lucrul, să nu strângă prea tare, să deplaseze unealta de tăiere la fiecare 8-10 secunde, să oprească ciocanul înainte de schimbarea poziției și să ia „mușcături” mici la tăierea betonului. Operatorii neinstruiți ridicau ciocanul fără să îl oprească și lucrau continuu aproximativ un minut. Instruirea a redus vibrația medie de la aproximativ 9 m/s 2 la aproximativ 7 m/s 2 și aproximativ 5.5 m/s 2, a mărit timpul până la atingerea valorii de acțiune și a valorii limită de expunere și a permis spargerea unei cantități de beton de până la 17 ori mai mari fără creșterea expunerilor la vibrații.
Check your RAMS against this document
Related guidance
- Information and training for operators and supervisors
- Mounted roadbreaker
- Diamond wire cutting
- Bursting concrete instead of breaking
Tell me when HSE changes this
Tell me when HSE changes Operator training provided by a breaker manufacturer. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.