HSE web guidance, updated 3 August 2026
HAV good practice controls
Current. Last checked with HSE on 15 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 3 August 2026
- HSE's date
- 3 August 2026
- Last checked
- 15 November 2026
What HSE changed
- 3 August 2026: HSE updated this page on 3 August 2026
The passage you were sent
What it says, in HSE's own words
Hand arm vibration can be a significant health risk wherever powered hand tools are used for significant lengths of time. This is especially so in foundries construction and heavy fabrication including ship building. HSE has identified some established good practice controls that can help to eliminate or reduce vibration risk in these industries and in others.
HSE inspectors are promoting these controls during inspections in these sectors and will expect to see evidence of the elimination of vibration risks or of their reduction to the lowest level that is reasonably practicable. Where vibration risks remain, inspectors will be looking for evidence that the risks are being managed adequately and that suitable health surveillance is in place. Follow the industry links below for information on established good practice for managing HAV risks.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This HSE guidance covers hand-arm vibration (HAV) risks in construction, foundries and heavy steel fabrication, including shipyards. It is for employers, employees, operators and supervisors using powered hand tools, and sets out established controls for eliminating or reducing exposure. Construction alternatives include mechanised tunnelling, machine-mounted breakers, hydraulic crushers, diamond drilling and water jetting, while unnecessary drilling, scabbling and hand breaking should be avoided. Where vibrating equipment is unavoidable, employers should select suitable, lower-vibration tools, maintain them, train operators, limit daily trigger time and reduce exposure to the lowest reasonably practicable level (Reg 6(2)). Controls also include ergonomic aids, warm clothing, breaks, information, training and health surveillance where the EAV is likely to be exceeded, including RIDDOR reporting arrangements.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Niniejsze wytyczne HSE dotyczą ryzyka związanego z drganiami przenoszonymi na ręce i ramiona (HAV) w budownictwie, odlewniach oraz ciężkiej prefabrykacji stalowej, w tym w stoczniach. Są przeznaczone dla pracodawców, pracowników, operatorów i osób nadzorujących używających zasilanych narzędzi ręcznych oraz określają ustalone środki kontroli służące eliminowaniu lub ograniczaniu narażenia. Alternatywy budowlane obejmują zmechanizowane drążenie tuneli, młoty montowane na maszynach, kruszarki hydrauliczne, wiercenie diamentowe i natryskiwanie wodą, natomiast należy unikać zbędnego wiercenia, groszkowania i ręcznego rozbijania. Gdy użycie sprzętu wytwarzającego drgania jest nieuniknione, pracodawcy powinni wybierać odpowiednie narzędzia o niższym poziomie drgań, utrzymywać je, szkolić operatorów, ograniczać dzienny czas trzymania wciśniętego przycisku oraz zmniejszać narażenie do najniższego poziomu, który jest racjonalnie wykonalny (Reg 6(2)). Środki kontroli obejmują także pomoce ergonomiczne, ciepłą odzież, przerwy, informacje, szkolenia i nadzór zdrowotny, gdy prawdopodobne jest przekroczenie EAV, w tym ustalenia dotyczące zgłaszania RIDDOR.
Machine-translated summary (Romanian)
Aceste îndrumări HSE acoperă riscurile de vibrații transmise sistemului mână-braț (HAV) în construcții, turnătorii și fabricarea grea a oțelului, inclusiv în șantiere navale. Sunt destinate angajatorilor, angajaților, operatorilor și supraveghetorilor care folosesc unelte manuale acționate și stabilesc controale consacrate pentru eliminarea sau reducerea expunerii. Alternativele pentru construcții includ excavarea mecanizată a tunelurilor, spărgătoare montate pe utilaje, concasoare hidraulice, forarea cu diamant și jetul de apă, în timp ce forarea, șlefuirea și spargerea manuală inutile trebuie evitate. Atunci când echipamentele vibratoare nu pot fi evitate, angajatorii ar trebui să aleagă unelte adecvate, cu vibrații reduse, să le întrețină, să instruiască operatorii, să limiteze timpul zilnic de apăsare a trăgaciului și să reducă expunerea la cel mai scăzut nivel rezonabil practicabil (Reg 6(2)). Controalele includ și ajutoare ergonomice, îmbrăcăminte călduroasă, pauze, informare, instruire și supraveghere medicală atunci când este probabil ca EAV să fie depășit, inclusiv măsuri pentru raportarea RIDDOR.
Check your RAMS against this document
Related guidance
- How employers can protect workers from hand-arm vibration
- Vibration risk assessment
- Worried about your hands?
- Guidance on measurement and monitoring
Tell me when HSE changes this
Tell me when HSE changes HAV good practice controls. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.