HSE web guidance, updated 8 July 2025
Worried about your hands?
Current. Last checked with HSE on 17 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 8 July 2025
- HSE's date
- 8 July 2025
- Last checked
- 17 November 2026
The passage you were sent
What it says, in HSE's own words
Introduction The information on this page is aimed mainly at workers. You could be risking damage to nerves, blood vessels and joints of the hand, wrist and arm if you work regularly with hand-held or hand-guided power tools for more than a few hours each day. Hand Arm Vibration Syndrome (HAVS) caused by exposure to vibration at work is preventable, but once the damage is done it is permanent.
The Control of Vibration at Work Regulations 2005 were introduced to better protect workers from vibration at work and came into force in July 2005. Am I at risk? You are at risk if you regularly use hand-held or handguided power tools and machines such as: Concrete breakers, concrete pokers; Sanders, grinders, disc cutters; Hammer drills; Chipping hammers; Chainsaws, brush cutters, hedge trimmers, Powered mowers; Scabblers or needle guns. You are also at risk if you hold workpieces, which vibrate while being processed by powered machinery such as pedestal grinders.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This page is aimed mainly at workers and covers hand-arm vibration, Hand Arm Vibration Syndrome (HAVS), risks, early symptoms, affected tasks and industries, and ways to reduce exposure. The employer is responsible for protecting workers against HAVS and carpal tunnel syndrome, finding out vibration exposure levels and assessing the health risk. Workers should ask whether work can be done without vibrating tools, use suitable low-vibration and properly maintained tools, keep cutting tools sharp, take breaks from tool use, avoid excessive gripping or forcing, keep warm and dry, recognise and promptly report symptoms, and use their employer’s control measures. The page refers to the Control of Vibration at Work Regulations 2005 and HSE publications INDG296 and INDG175 - rev2.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta strona jest przeznaczona głównie dla pracowników i obejmuje drgania przenoszone na ręce i ramiona, zespół wibracyjny (HAVS), zagrożenia, wczesne objawy, zadania i branże, których to dotyczy, oraz sposoby ograniczania narażenia. Pracodawca odpowiada za ochronę pracowników przed HAVS i zespołem cieśni nadgarstka, ustalenie poziomów narażenia na drgania oraz ocenę zagrożenia dla zdrowia. Pracownicy powinni zapytać, czy pracę można wykonać bez narzędzi powodujących drgania, używać odpowiednich narzędzi o małym poziomie drgań i właściwie konserwowanych, utrzymywać narzędzia tnące w stanie ostrym, robić przerwy w używaniu narzędzi, unikać nadmiernego ściskania lub naciskania, utrzymywać ciepło i suchość, rozpoznawać objawy i niezwłocznie je zgłaszać oraz stosować środki kontroli wprowadzone przez pracodawcę. Strona odwołuje się do Control of Vibration at Work Regulations 2005 oraz publikacji HSE INDG296 i INDG175 - rev2.
Machine-translated summary (Romanian)
Această pagină se adresează în principal lucrătorilor și acoperă vibrațiile transmise sistemului mână-braț, sindromul vibrațiilor mână-braț (HAVS), riscurile, simptomele timpurii, sarcinile și industriile afectate și modalitățile de reducere a expunerii. Angajatorul este responsabil pentru protejarea lucrătorilor împotriva HAVS și a sindromului de tunel carpian, stabilirea nivelurilor de expunere la vibrații și evaluarea riscului pentru sănătate. Lucrătorii ar trebui să întrebe dacă munca poate fi efectuată fără unelte care vibrează, să folosească unelte adecvate, cu vibrații reduse și întreținute corespunzător, să mențină uneltele de tăiere ascuțite, să ia pauze de la folosirea uneltelor, să evite strângerea sau forțarea excesivă, să se mențină calzi și uscați, să recunoască și să raporteze prompt simptomele și să folosească măsurile de control instituite de angajator. Pagina face referire la Control of Vibration at Work Regulations 2005 și la publicațiile HSE INDG296 și INDG175 - rev2.
Check your RAMS against this document
Related guidance
- How employers can protect workers from hand-arm vibration
- Advice for employers: Overview
- HAV good practice controls
- Vibration risk assessment
Tell me when HSE changes this
Tell me when HSE changes Worried about your hands?. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.