HSE web guidance, updated 20 January 2026
Guidance on measurement and monitoring
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 20 January 2026
- HSE's date
- 20 January 2026
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
Monitoring employees' exposure to vibration Monitoring hand-arm vibration exposure all the time is probably not a good use of resources and monitoring alone is not enough to control risk. You still have to show that you have reduced vibration risk to as low as is reasonably practicable. If you are using a monitoring system to prevent employees from reaching a set limit, be aware that retrospective recording can result in employees exceeding the set limit before you know they have done so.
If you choose to use a monitoring system, be sure you are using it correctly. Logbooks, data loggers and tool timers can be used to monitor and estimate hand-arm vibration exposure. However, HSE has found that different electronic monitoring systems can vary by up to 20% when monitoring the same task. Do not confuse electronic monitoring systems with vibration measurement systems. Some electronic monitoring systems can calculate hand-arm vibration exposures.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The guidance covers monitoring employees’ hand-arm vibration exposure and measuring workplace vibration. Monitoring alone is not enough: vibration risk still has to be reduced as low as is reasonably practicable. Logbooks, data loggers and tool timers can estimate exposure, but systems may vary by up to 20%, and retrospective recording may allow a set limit to be exceeded before this is known. Input data must represent the tool in use, with a suitable margin for variability; calculated results must be in m/s2 A (8) or ‘exposure points’ for valid comparisons with the Exposure Action and Limit Values. Measurement is only needed where suitable alternative data is unavailable, and a competent person should use specialised equipment. Instrumentation, transducers and mounting methods should meet the stated specifications.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Wytyczne obejmują monitorowanie narażenia pracowników na drgania przenoszone na rękę oraz pomiary drgań w miejscu pracy. Samo monitorowanie nie wystarcza: ryzyko związane z drganiami nadal trzeba ograniczyć do poziomu tak niskiego, jak jest to racjonalnie wykonalne. Dzienniki, rejestratory danych i liczniki czasu pracy narzędzi mogą szacować narażenie, ale systemy mogą różnić się nawet o 20%, a zapis retrospektywny może pozwolić na przekroczenie ustalonego limitu, zanim będzie o tym wiadomo. Wprowadzane dane muszą przedstawiać używane narzędzie, z odpowiednim marginesem uwzględniającym zmienność; obliczone wyniki muszą być podane w m/s2 A (8) lub „punktach narażenia”, aby umożliwić prawidłowe porównania z wartościami działania i granicznymi narażenia. Pomiary są potrzebne tylko wtedy, gdy nie są dostępne odpowiednie dane z alternatywnych źródeł, a kompetentna osoba powinna użyć specjalistycznego sprzętu. Aparatura, przetworniki i metody mocowania powinny spełniać podane specyfikacje.
Machine-translated summary (Romanian)
Ghidul acoperă monitorizarea expunerii angajaților la vibrații transmise prin mână și măsurarea vibrațiilor la locul de muncă. Monitorizarea singură nu este suficientă: riscul provocat de vibrații trebuie în continuare redus la un nivel cât mai scăzut posibil în mod rezonabil. Jurnalele, înregistratoarele de date și temporizatoarele uneltelor pot estima expunerea, dar sistemele pot varia cu până la 20%, iar înregistrarea retrospectivă poate permite depășirea unei limite stabilite înainte ca acest lucru să fie cunoscut. Datele introduse trebuie să reprezinte unealta folosită, cu o marjă adecvată pentru a ține cont de variabilitate; rezultatele calculate trebuie să fie în m/s2 A (8) sau „puncte de expunere”, pentru comparații valide cu valorile de acțiune și limită pentru expunere. Măsurarea este necesară numai atunci când nu sunt disponibile date alternative adecvate, iar o persoană competentă ar trebui să utilizeze echipamente specializate. Instrumentația, traductoarele și metodele de montare ar trebui să respecte specificațiile menționate.
Check your RAMS against this document
Related guidance
- Advice for employers: Overview
- Vibration risk assessment
- The hand-arm vibration exposure calculator
- HAV good practice controls
Tell me when HSE changes this
Tell me when HSE changes Guidance on measurement and monitoring. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.