KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 17 March 2025

Pneumatic exhausts

Current. Last checked with HSE on 17 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 17 March 2025
HSE's date
17 March 2025
Last checked
17 November 2026

What it says, in HSE's own words

The Problem A knife system, which cuts roof tiles to shape, was producing 92dB at 1m from the operator's side. Most of the noise arose from the exhaust on the pneumatic cylinders used to move the knives up and down. There was also a contribution from the solenoid valve exhaust. In this instance conventional pneumatic silencers would have caused a backpressure which would result in an unacceptable reduction in throughput. Such silencers can clog with oil and/or debris after a period of time.
In this case six pneumatic exhausts were piped to a manifold which in turn was piped to a straight through silencer. This silencer was located away from the work area to further reduce the noise impact and orientated downwards to allow oil, etc to drip away naturally. The Results The noise levels were reduced by 12dB. The Costs The total cost was circa £800 (2005 rates). Information supplied by Marley Eternit Ltd. & PDA Ltd.

Quoted from HSE. Open the original on hse.gov.uk

Key points

A knife system used to cut roof tiles to shape was producing 92dB at 1m from the operator's side. Most of the noise came from the exhaust on the pneumatic cylinders used to move the knives up and down, with a contribution from the solenoid valve exhaust. Conventional pneumatic silencers would have caused backpressure, resulting in an unacceptable reduction in throughput, and could clog with oil and/or debris. Six pneumatic exhausts were piped to a manifold and then to a straight through silencer. The silencer was located away from the work area and orientated downwards so oil, etc could drip away naturally. Noise levels were reduced by 12dB. The total cost was circa £800 (2005 rates).

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

System nożowy używany do kształtowania dachówek powodował hałas o poziomie 92dB w odległości 1m od strony operatora. Większość hałasu pochodziła z wydechu na cylindrach pneumatycznych używanych do poruszania nożami w górę i w dół, z udziałem wydechu zaworu elektromagnetycznego. Konwencjonalne tłumiki pneumatyczne powodowałyby przeciwciśnienie, skutkujące niedopuszczalnym zmniejszeniem wydajności, i mogły zatykać się olejem i/lub zanieczyszczeniami. Sześć wydechów pneumatycznych podłączono przewodami do kolektora, a następnie do tłumika przelotowego. Tłumik umieszczono z dala od obszaru pracy i skierowano w dół, aby olej itp. mogły naturalnie odciekać. Poziomy hałasu zmniejszono o 12dB. Całkowity koszt wyniósł około £800 (stawki z 2005 r.).

Machine-translated summary (Romanian)

Un sistem de cuțite folosit pentru a tăia țiglele de acoperiș la forma dorită producea 92dB la 1m de partea operatorului. Cea mai mare parte a zgomotului provenea de la evacuarea cilindrilor pneumatici folosiți pentru a deplasa cuțitele în sus și în jos, cu o contribuție din partea evacuării supapei solenoidale. Amortizoarele pneumatice convenționale ar fi produs contrapresiune, ceea ce ar fi dus la o reducere inacceptabilă a debitului, și s-ar fi putut înfunda cu ulei și/sau reziduuri. Șase evacuări pneumatice au fost racordate prin conducte la un colector, care la rândul său a fost racordat la un amortizor cu trecere directă. Acesta a fost amplasat departe de zona de lucru și orientat în jos, pentru ca uleiul etc. să se scurgă natural. Nivelurile de zgomot au fost reduse cu 12dB. Costul total a fost de circa £800 (tarife din 2005).

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.