KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 17 March 2025

General information

Current. Last checked with HSE on 14 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 17 March 2025
HSE's date
17 March 2025
Last checked
14 November 2026

What it says, in HSE's own words

Introduction Filling a mould This document contains general information for employers in the concrete products industry on common sources of noise and on how the noise may be reduced. Noisy processes in the concrete products industry There are many different sources of noise in the concrete products industry which can result in personal noise exposures which exceed the upper exposure action value of the Control of Noise at Work Regulations 2005 (a daily noise exposure of 85 dB) and so need to be controlled.
Vibrating tables or conveyors for compacting concrete in flat products such as paving slabs. High levels of noise can be generated by the vibration generator itself and also from the impacts as the moulds or pallets rattle on the table surface. Vibrating presses for producing blocks and tiles. Impacts between pallets or moulds on conveyors or impacts due to falling waste material.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This document contains general information for employers in the concrete products industry on common sources of noise and how noise may be reduced. It describes noise from vibrating conveyors, tables and presses, impacts, saws and other processes, and gives measured noise levels at worker positions. If anyone may be exposed above the lower exposure action value, a daily exposure of 80 dB, employers should assess the risk and plan actions to control workplace noise; measurement should be done by someone with the necessary training and experience. If daily noise exposures are above the upper exposure action value of 85dB, noise exposure must be reduced so far as is reasonable. Controls include changing or eliminating processes, insulation, absorption, damping, isolation, impact reduction, pneumatic exhaust silencers, moving noisy equipment and using quieter methods.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejszy dokument zawiera ogólne informacje dla pracodawców w przemyśle wyrobów betonowych dotyczące typowych źródeł hałasu oraz sposobów ograniczania hałasu. Opisuje hałas pochodzący z wibrujących przenośników, stołów i pras, uderzeń, pił oraz innych procesów, a także podaje zmierzone poziomy hałasu na stanowiskach pracowników. Jeżeli ktokolwiek może być narażony powyżej dolnej wartości działania narażenia, czyli dziennego narażenia wynoszącego 80 dB, pracodawcy powinni ocenić ryzyko i zaplanować działania mające na celu kontrolowanie hałasu w miejscu pracy; pomiary powinny być wykonywane przez osobę posiadającą niezbędne przeszkolenie i doświadczenie. Jeżeli dzienne narażenie na hałas przekracza górną wartość działania narażenia wynoszącą 85dB, narażenie na hałas musi zostać zmniejszone w rozsądnie wykonalnym zakresie. Środki kontroli obejmują zmianę lub eliminację procesów, izolację, pochłanianie, tłumienie, odizolowanie, ograniczanie uderzeń, tłumiki wydechu pneumatycznego, odsuwanie hałaśliwego wyposażenia oraz stosowanie cichszych metod.

Machine-translated summary (Romanian)

Acest document conține informații generale pentru angajatorii din industria produselor din beton privind sursele obișnuite de zgomot și modul în care zgomotul poate fi redus. Acesta descrie zgomotul produs de transportoare, mese și prese vibratoare, impacturi, ferăstraie și alte procese și prezintă niveluri de zgomot măsurate la posturile de lucru. Dacă este posibil ca o persoană să fie expusă peste valoarea inferioară de acțiune pentru expunere, o expunere zilnică de 80 dB, angajatorii ar trebui să evalueze riscul și să planifice acțiuni pentru controlul zgomotului la locul de muncă; măsurarea ar trebui efectuată de cineva cu instruirea și experiența necesare. Dacă expunerile zilnice la zgomot depășesc valoarea superioară de acțiune pentru expunere de 85dB, expunerea la zgomot trebuie redusă în măsura în care este rezonabil. Măsurile de control includ schimbarea sau eliminarea proceselor, izolarea, absorbția, amortizarea, izolarea vibrațiilor, reducerea impactului, amortizoare pentru evacuarea pneumatică, îndepărtarea echipamentelor zgomotoase și folosirea unor metode mai silențioase.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.