KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 3 April 2025

Worker received shock whilst using a pressure water washing machine

Current. Last checked with HSE on 12 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 3 April 2025
HSE's date
3 April 2025
Last checked
12 November 2026

What it says, in HSE's own words

A worker received a 240 Volt electric shock whilst using a pressure water washing machine. An investigation found the company had failed to: a) maintain the washer, b) provide a safe system of work and c) notify the existence of the factory to HSE. There was a high potential for serious injury from contact with 240 Volt electricity supply when using water washing equipment.
1989 (No 4) paragraph 2, and The Electricity at Work Regulations 1989 (No 4) paragraph 1, and fined. Comment All work equipment should be regularly checked to ensure it is safe to use. A visual check each day, or each time the equipment is used is likely to identify many of the potential electrical faults. Work equipment should also be thoroughly tested regularly. This should be done frequently enough that there is little chance a fault will develop that will lead to danger.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This guidance describes a worker receiving a 240 Volt electric shock while using a pressure water washing machine and the investigation, which found that the company had failed to maintain the washer, provide a safe system of work and notify HSE of the factory’s existence. It explains that work equipment should be regularly checked, including a visual check each day or each time it is used, and thoroughly tested often enough to minimise the chance of a dangerous fault developing. Equipment used on building sites or outdoors will generally need more frequent testing. It also warns about the limitations of electrical socket testers and lists further HSE guidance.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejsze wytyczne opisują przypadek porażenia pracownika prądem o napięciu 240 Volt podczas używania myjki ciśnieniowej wodnej oraz dochodzenie, które wykazało, że firma nie utrzymywała myjki, nie zapewniła bezpiecznego systemu pracy i nie powiadomiła HSE o istnieniu fabryki. Wyjaśniają, że sprzęt roboczy powinien być regularnie sprawdzany, w tym wizualnie każdego dnia lub za każdym razem, gdy jest używany, oraz dokładnie testowany wystarczająco często, aby zminimalizować możliwość powstania niebezpiecznej usterki. Sprzęt używany na placach budowy lub na zewnątrz będzie na ogół wymagał częstszych testów. Ostrzega również o ograniczeniach testerów gniazd elektrycznych i wymienia dalsze wytyczne HSE.

Machine-translated summary (Romanian)

Aceste îndrumări descriu cazul unui lucrător care a primit un șoc electric de 240 Volt în timp ce folosea un aparat de spălare cu apă sub presiune și ancheta, care a constatat că firma nu întreținuse aparatul de spălare, nu asigurase un sistem de lucru sigur și nu notificase HSE cu privire la existența fabricii. Ele explică faptul că echipamentele de muncă ar trebui verificate periodic, inclusiv printr-o verificare vizuală în fiecare zi sau de fiecare dată când sunt utilizate, și testate temeinic suficient de frecvent pentru a reduce la minimum posibilitatea apariției unei defecțiuni periculoase. Echipamentele folosite pe șantiere sau în aer liber vor necesita, în general, testări mai frecvente. De asemenea, avertizează asupra limitărilor testerelor de prize electrice și enumeră îndrumări HSE suplimentare.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.