HSE web guidance, updated 3 April 2025
Employee received a shock whilst touching a metal fence
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 3 April 2025
- HSE's date
- 3 April 2025
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
A contractor's employee touched a metal mesh fence against which a live cable end was resting and received a 415 Volt electric shock. This occurred after a Permit to Work irregularity by the host company, inadequate isolation of the job by an electrical contractor's electrician, and re-energising of the circuit by the host company. Investigation of the incident revealed a failure to properly manage the permit to work system over a period of 14 months. Action The host company was prosecuted under the Health and Safety At Work etc.
Act 1974, Section 3, Sub Section 1, and fined £10,000. The electrical contractor was also prosecuted. Comment Those in control of work on electrical equipment or installations should ensure it is carried out in a manner that, so far as is reasonably practicable, does not lead to danger. Precautions should be taken to ensure that equipment that has been electrically isolated cannot be reenergised if danger will result. The downloadable HSE booklet Electricity at work - safe working practices provides guidance on safe working practices.
Quoted from HSE. Open the original on hse.gov.uk
Key points
A contractor’s employee received a 415 Volt electric shock after touching a metal mesh fence against which a live cable end was resting. The incident followed a Permit to Work irregularity by the host company, inadequate isolation of the job by an electrical contractor’s electrician, and re-energising of the circuit by the host company. An investigation found that the permit to work system had not been properly managed over a period of 14 months. The host company was prosecuted under the Health and Safety At Work etc. Act 1974, Section 3, Sub Section 1, and fined £10,000; the electrical contractor was also prosecuted. Those in control of work on electrical equipment or installations should ensure it is carried out so far as is reasonably practicable without danger, and should prevent isolated equipment being reenergised where danger could result.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Pracownik wykonawcy doznał porażenia prądem o napięciu 415 Volt po dotknięciu metalowego ogrodzenia siatkowego, na którym opierał się koniec przewodu pod napięciem. Do zdarzenia doszło w następstwie nieprawidłowości dotyczącej Permit to Work po stronie firmy goszczącej, niewystarczającego odizolowania zadania przez elektryka wykonawcy elektrycznego oraz ponownego zasilenia obwodu przez firmę goszczącą. Dochodzenie wykazało, że system pozwoleń na pracę nie był właściwie zarządzany przez okres 14 months. Firma goszcząca została oskarżona na podstawie Health and Safety At Work etc. Act 1974, Section 3, Sub Section 1, i ukarana grzywną £10,000; wykonawca elektryczny również został oskarżony. Osoby kontrolujące prace przy sprzęcie lub instalacjach elektrycznych powinny zapewnić, aby były wykonywane, w zakresie reasonably practicable, bez zagrożenia, oraz powinny zapobiegać ponownemu zasileniu odizolowanego sprzętu, gdy mogłoby to spowodować zagrożenie.
Machine-translated summary (Romanian)
Un angajat al unui contractor a primit un șoc electric de 415 Volt după ce a atins un gard metalic din plasă, de care se sprijinea capătul unui cablu sub tensiune. Incidentul a avut loc în urma unei nereguli privind Permit to Work din partea companiei gazdă, a izolării necorespunzătoare a lucrării de către electricianul unui contractor electric și a reenergizării circuitului de către compania gazdă. Investigația a constatat că sistemul de permise de lucru nu fusese gestionat corespunzător pe o perioadă de 14 months. Compania gazdă a fost urmărită penal în temeiul Health and Safety At Work etc. Act 1974, Section 3, Sub Section 1, și amendată cu £10,000; contractorul electric a fost, de asemenea, urmărit penal. Cei care controlează lucrările la echipamente sau instalații electrice ar trebui să se asigure că acestea sunt efectuate, în măsura reasonably practicable, fără pericol și ar trebui să împiedice reenergizarea echipamentelor izolate atunci când aceasta ar putea produce un pericol.
Check your RAMS against this document
Related guidance
- Employee killed whilst changing an electrode
- Employee sustained broken shoulders when testing a incorrectly wired appliance
- Worker received shock whilst using a pressure water washing machine
- Electrician suffered shock when electrical supply had not been properly isolated
Tell me when HSE changes this
Tell me when HSE changes Employee received a shock whilst touching a metal fence. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.