KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 3 April 2025

Employee was killed while working with poorly constructed equipment

Current. Last checked with HSE on 15 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 3 April 2025
HSE's date
3 April 2025
Last checked
15 November 2026

What it says, in HSE's own words

An employee was killed by a 415 volt electric shock whilst setting up equipment to test printed circuit boards. The test equipment was poorly constructed, resulting in the employee working in close proximity to live connectors at the ends of test leads. Action The employers were prosecuted under the Electricity at Work Regulations 1989, Regulations 4(1) - Unsuitable design of test equipment 4(3), 7 - Live exposed conductors & 14. They were fined.
A risk assessment should be done to identify the hazards, the risks arising from the hazards, and the control measures needed to control the risks. The control measures should be incorporated into the safe system of work. Workers should be instructed to use the safe system of work, and the effectiveness of the safe system of work monitored. It is very beneficial for all staff to have knowledge of emergency procedures.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This case concerns an employee who was killed by a 415 volt electric shock while setting up equipment to test printed circuit boards. The poorly constructed equipment placed the employee close to live connectors at the ends of test leads. The employers were prosecuted under the Electricity at Work Regulations 1989, Regulations 4(1), 4(3), 7 and 14, and were fined. Equipment should be designed without giving rise to electrical or other risks, and a safe system of work should ensure it is used correctly. A risk assessment should identify hazards, risks and control measures, which should be included in the safe system of work. Workers should be instructed in its use, and its effectiveness monitored.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Ten przypadek dotyczy pracownika, który został zabity przez porażenie prądem o napięciu 415 voltów podczas ustawiania urządzenia do testowania płytek obwodów drukowanych. Źle skonstruowane urządzenie umieściło pracownika blisko przewodów pod napięciem na końcach przewodów testowych. Pracodawcy zostali postawieni w stan oskarżenia na podstawie Electricity at Work Regulations 1989, Regulations 4(1), 4(3), 7 i 14, oraz zostali ukarani grzywną. Urządzenia powinny być projektowane tak, aby nie powodowały zagrożeń elektrycznych ani innych, a bezpieczny system pracy powinien zapewniać ich prawidłowe używanie. Ocena ryzyka powinna wskazywać zagrożenia, ryzyko i środki kontroli, które powinny zostać włączone do bezpiecznego systemu pracy. Pracownicy powinni zostać poinstruowani w zakresie jego stosowania, a jego skuteczność monitorowana.

Machine-translated summary (Romanian)

Acest caz se referă la un angajat care a fost ucis de un șoc electric de 415 volți în timp ce instala echipamente pentru testarea plăcilor cu circuite imprimate. Echipamentul construit necorespunzător a pus angajatul în apropierea conectorilor sub tensi de la capetele cablurilor de testare. Angajatorii au fost trimiși în judecată în temeiul Electricity at Work Regulations 1989, Regulations 4(1), 4(3), 7 și 14, și au fost amendați. Echipamentele ar trebui proiectate astfel încât să nu genereze riscuri electrice sau de altă natură, iar un sistem sigur de lucru ar trebui să asigure utilizarea corectă a acestora. O evaluare a riscurilor ar trebui să identifice pericolele, riscurile și măsurile de control, care ar trebui incluse în sistemul sigur de lucru. Lucrătorii ar trebui instruiți cu privire la utilizarea acestuia, iar eficacitatea acestuia monitorizată.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.