KASQSite safety, in the crew's language
Start free

Hand-arm vibration (HAVS) toolbox talk

A complete toolbox talk on hand-arm vibration for a construction site in Great Britain, with a sign-on sheet to print, the HSE guidance it draws on, and three common questions answered from HSE guidance, with the source.

This talk in: English · Polski · Română

The talk comes from the KASQ Toolbox talks tool (11 November 2026, example company AUDIT Builders Ltd). The text is as the tool printed it.

The guidance quoted on this page is from the Health and Safety Executive (HSE), the workplace health and safety regulator for Great Britain.

The talk

Hand-arm vibration: control your exposure

AUDIT Builders Ltd · Delivery date: 11 November 2026 · Delivered by: AUDIT Supervisor
Toolbox talk

Regular and frequent exposure can cause permanent hand-arm vibration syndrome and carpal tunnel syndrome, including numbness, loss of strength and painful white fingers. This talk does not set the site’s tool-specific exposure assessment or health-surveillance arrangements; those arrangements must be taken from the site RAMS.

Key points

  1. Know that vibration exposure depends on the tool’s vibration magnitude and the time your hand is actually gripping it, known as trigger time.
  2. Keep exposure below the daily exposure limit value of 5 m/s² A(8), and reduce exposure as low as reasonably practicable when it is above the daily exposure action value of 2.5 m/s² A(8).
  3. Choose an alternative work method or a suitable lower-vibration tool whenever possible, and keep tools maintained according to the manufacturer’s instructions.
  4. Use the right tool, follow the training, avoid unnecessary grip force, and do not use equipment outside the manufacturer’s recommended operating conditions.
  5. Plan work to minimise vibration exposure, avoid uncomfortable postures and high manual effort, and keep hands warm and dry.
  6. Report tingling, numbness, loss of strength, pain or fingers going white, and use the health-surveillance arrangements provided for workers at risk.

Do

  • Know which tools create vibration and record the time your hands are actually in contact with them.
  • Use lower-vibration equipment or another work method where available.
  • Keep tools maintained and use them as trained.
  • Report symptoms early and attend health surveillance when arranged.
  • Keep your hands warm and dry.

Don't

  • Don’t ignore tingling, numbness, pain, loss of strength or white fingers.
  • Don’t use a tool with more grip force or pressure than the task requires.
  • Don’t use a tool outside the manufacturer’s recommended operating conditions.
  • Don’t assume short, repeated uses are harmless; trigger time still contributes to exposure.
  • Don’t continue using poorly maintained equipment.

Ask the crew

  1. What two things determine your vibration exposure?
  2. What are the daily exposure action and limit values?
  3. What should you do if you notice tingling, numbness or white fingers?
  4. How can you reduce vibration before relying on time limits?
Before you deliver this talk
  • Check this talk against the site's own rules for the task — where the RAMS, permits or method statement are stricter, they win.
  • Tell the crew where the current inspection records are kept and who to raise concerns with before starting.
  • If practical, deliver it at the work area and point at the real thing.

Sign-on sheet

Sign-on

Toolbox talk: Hand-arm vibration: control your exposure · Talk date: 11 November 2026 · by AUDIT Supervisor · for AUDIT Builders Ltd

By signing I confirm that I attended this toolbox talk, that I understood it, and that I will raise any concern about this work with my supervisor before starting.

Podpisując, potwierdzam, że uczestniczyłem(-am) w tej rozmowie, zrozumiałem(-am) ją i każdą wątpliwość dotyczącą tej pracy zgłoszę przełożonemu przed rozpoczęciem.

Prin semnătură confirm că am participat la această discuție, că am înțeles-o și că voi ridica orice îngrijorare legată de această lucrare superiorului meu înainte de a începe.

#NameTradeSignature
1
2
3
4
5
6
Checked sources: Hand-arm vibration at work: A brief guide for employers INDG175 (HSE) · Hand-arm vibration - The Control of Vibration at Work Regulations 2005 (L140) (HSE) · Stoneworkers: Health and safety topics - Vibration and noise (HSE) · Hand-arm vibration (HSE)
Made with KASQ · kasq.uk — guidance only; it does not replace site rules, RAMS, permits or a competent person. KASQ is an APPSTAR LTD product, not affiliated with the Health and Safety Executive. Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0.

The sheet carries the example company and date. To print one with your own company, date and presenter, make the talk in the tool.

Common questions

What is hand-arm vibration?

Hand-arm vibration is vibration transmitted into workers' hands and arms. This can come from use of hand-held power tools (such as grinders or road breakers), hand-guided equipment (such as powered lawnmowers or pedestrian controlled floor saws) or by holding materials being worked by hand-fed machines (such as pedestal grinders or forge hammers).

Source: HSE, “Hand-arm vibration at work: A brief guide (INDG175)”. Read on 11 November 2026.

What are the symptoms of hand-arm vibration syndrome (HAVS)?

Quality of life can be badly affected by hand-arm vibration syndrome. For some people symptoms appear after only a few months of exposure but for others it may take years. For example, affected people may find that:

  • they suffer tingling and numbness in the fingers, or pain, distress or disturbed sleep
  • they cannot feel things properly or do fine work (eg assembling small components) or everyday tasks (eg fastening buttons)
  • they lose strength in the hands, for example reduced grip strength or reduced ability to work in cold or damp conditions, which might affect their ability to work safely
  • their fingers go white (blanching) and becoming red and painful on recovery

Source: HSE, “Vibration”. Read on 11 November 2026.

How long can you use a vibrating tool in a day?

HSE's rough guide:

As a rough guide, if workers regularly use hammer action power tools for more than 15 minutes per day, or rotary or other action power tools for more than about an hour per day, there may be a problem with exposure to hand-arm vibration.

Source: HSE, “Vibration”. Read on 11 November 2026.

Sources named in this talk

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0.