KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 10 January 2025

Safety risks from welding

Current. Last checked with HSE on 17 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 10 January 2025
HSE's date
10 January 2025
Last checked
17 November 2026

What it says, in HSE's own words

Confined space working The main risk from confined space working is the lack of oxygen. You may be working in an identified confined space, but you should also be aware if your workspace could become a confined space as you weld. Inert gases and some common chemical reactions (for example rusting) can reduce the amount of oxygen inside enclosed spaces such as tanks, pipes and pits. Working in these locations is dangerous. Plan before you enter a confined space: consider if there is a way to do the job without going in if you have to go in, use a safe system of work.
Confined spaces: A brief guide to working safely gives more guidance on this make sure you know what the emergency rescue plan is never use oxygen supplies to 'sweeten' the air (this is a very serious fire risk) Welding gases such as argon, carbon dioxide, nitrogen and helium can displace the air inside enclosed spaces. Argon and carbon dioxide are relatively 'heavy' gases. They can pool in places where you do not normally expect to have a problem, for example vehicle inspection pits.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Before entering a confined space, consider whether the work can be done without entry; if entry is necessary, use a safe system of work, know the emergency rescue plan and never use oxygen supplies to ‘sweeten’ the air. Clear flammable materials before hot work; where hot work cannot be carried out safely or combustible material cannot be removed, a fire watch should continue during and after the work, for at least 30 minutes after completion and, where ignition may be difficult to detect or slow to develop, up to 60 minutes. Welders are responsible for daily equipment checks and reporting defects; employers should arrange regular checks.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Przed wejściem do przestrzeni zamkniętej należy rozważyć, czy pracę można wykonać bez wchodzenia; jeśli wejście jest konieczne, należy stosować bezpieczny system pracy, znać plan awaryjnego ratowania i nigdy nie używać dopływu tlenu do „poprawiania” powietrza. Przed pracami gorącymi należy usunąć materiały palne; gdy prac gorących nie można wykonywać bezpiecznie lub materiałów palnych nie można usunąć, obserwacja przeciwpożarowa powinna trwać podczas pracy i po jej zakończeniu, przez co najmniej 30 minut po zakończeniu, a gdy zapłon może być trudny do wykrycia lub rozwijać się powoli — do 60 minut. Spawacze odpowiadają za codzienne kontrole sprzętu i zgłaszanie usterek; pracodawcy powinni organizować regularne kontrole.

Machine-translated summary (Romanian)

Înainte de intrarea într-un spațiu închis, luați în considerare dacă lucrarea poate fi făcută fără intrare; dacă intrarea este necesară, folosiți un sistem de lucru sigur, cunoașteți planul de salvare de urgență și nu folosiți niciodată surse de oxigen pentru a „îmbunătăți” aerul. Îndepărtați materialele inflamabile înaintea lucrărilor la cald; când lucrările la cald nu pot fi efectuate în siguranță sau materialele combustibile nu pot fi îndepărtate, supravegherea împotriva incendiilor ar trebui menținută în timpul și după lucrare, cel puțin 30 de minute după finalizare și, când aprinderea poate fi dificil de detectat sau se poate dezvolta lent, până la 60 de minute. Sudorii sunt responsabili pentru verificările zilnice ale echipamentului și raportarea defectelor; angajatorii ar trebui să organizeze verificări regulate.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.