HSE web guidance, updated 10 January 2025
Asphyxiation hazards in welding and allied processes
Current. Last checked with HSE on 15 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 10 January 2025
- HSE's date
- 10 January 2025
- Last checked
- 15 November 2026
The passage you were sent
What it says, in HSE's own words
Introduction This guidance gives advice on asphyxiant gases used when welding metal fabrications and pipes, and in particular a technique known as purge damming, (containment of purging gasses in the area being worked on).
It will be useful for employers and workers planning this type of work, and for inspectors assessing whether the controls in place are adequate to control the risks to health and safety. The consequences of exposure to an oxygen deficient atmosphere can be fatal, yet with reasonably practicable controls, as explained below, the risk can be reduced to an acceptable level. Accident history indicates that multiple workers are often affected. This is mainly as a result of the rescuer attempting a rescue, but getting into difficulties themselves due to the reduced oxygen levels.
Quoted from HSE. Open the original on hse.gov.uk
Check your RAMS against this document
Related guidance
- Safety risks from welding
- Health risks from welding
- Controlling the risks from welding
- The safe use of oxy-propane preheating
Tell me when HSE changes this
Tell me when HSE changes Asphyxiation hazards in welding and allied processes. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.