KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 10 January 2025

Maintenance, examination and testing of LEV and RPE

Current. Last checked with HSE on 17 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 10 January 2025
HSE's date
10 January 2025
Last checked
17 November 2026

What it says, in HSE's own words

The Control of Substances Hazardous to Health Regulations (COSHH) require the maintenance and thorough examination and testing of control measures at specific intervals to ensure the control measures are effective at all times. Controls mean more than just the hardware (LEV and/or RPE) but also safe systems of work, provision of an RPE programme and supervision.
Most welding fumes are easy to see, so you can assess control by observing how well the LEV captures the fume. For TIG welding, where there is little visible fume, you may need to use a dust lamp. You can video the process to do a qualitative fume assessment where arc welding processes produce UV radiation you cannot look at without suitable eye protection.

Quoted from HSE. Open the original on hse.gov.uk

Key points

The guidance explains that COSHH requires control measures for welding fumes to be maintained, thoroughly examined and tested at specific intervals so they remain effective. Controls include LEV and/or RPE, safe systems of work, an RPE programme and supervision. All control measures should be kept in an efficient state, efficient working order, good repair and clean condition. Welding-fume capture can be assessed by observation, a dust lamp for TIG welding, or video where UV radiation prevents direct viewing without suitable eye protection. LEV must be thoroughly examined and tested at least every 14 months. RPE must be thoroughly inspected before each use, with records kept for reusable RPE examinations, maintenance, repairs and, where appropriate, testing.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Wytyczne wyjaśniają, że COSHH wymaga, aby środki kontroli dotyczące dymów spawalniczych były utrzymywane, dokładnie badane i testowane w określonych odstępach czasu, aby pozostawały skuteczne. Środki kontroli obejmują LEV i/lub RPE, bezpieczne systemy pracy, program RPE oraz nadzór. Wszystkie środki kontroli powinny być utrzymywane w sprawnym stanie, w sprawnym działaniu, w dobrym stanie technicznym i w czystości. Skuteczność wychwytywania dymu spawalniczego można oceniać przez obserwację, użycie lampy pyłowej podczas spawania TIG lub nagranie wideo, gdy promieniowanie UV uniemożliwia bezpośrednią obserwację bez odpowiedniej ochrony oczu. LEV musi być dokładnie badany i testowany co najmniej co 14 miesięcy. RPE musi być dokładnie sprawdzany przed każdym użyciem, a dla wielorazowego RPE należy prowadzić zapisy badań, konserwacji, napraw oraz, w stosownych przypadkach, testowania.

Machine-translated summary (Romanian)

Îndrumările explică faptul că COSHH impune ca măsurile de control pentru fumurile de sudură să fie întreținute, examinate amănunțit și testate la intervale specificate, pentru a rămâne eficiente. Măsurile de control includ LEV și/sau RPE, sisteme de lucru sigure, un program RPE și supraveghere. Toate măsurile de control ar trebui menținute într-o stare eficientă, în stare eficientă de funcționare, în stare bună și curate. Captarea fumului de sudură poate fi evaluată prin observare, folosind o lampă de praf pentru sudarea TIG sau prin filmare atunci când radiația UV împiedică observarea directă fără protecție adecvată a ochilor. LEV trebuie examinat și testat amănunțit cel puțin o dată la 14 luni. RPE trebuie inspectat amănunțit înainte de fiecare utilizare, iar pentru RPE reutilizabil trebuie păstrate înregistrări ale examinărilor, întreținerii, reparațiilor și, după caz, testării.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.