KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 22 July 2025

Surface roughness

Current. Last checked with HSE on 12 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 22 July 2025
HSE's date
22 July 2025
Last checked
12 November 2026

What it says, in HSE's own words

Please select the from the following questions: What type of roughness meter should I use? Where can I buy a suitable meter? What is Rz and why does the system use it? Are there situations where roughness meters should not be used? What type of roughness meter should I use? Operation of the SAT relies upon the production of accurate information concerning floor surface microroughness.
Stylus -90 degree, 5mm radius diamond tipped These are typical parameters used by most meters currently on sale. The use of a stylus (similar to that used on a record player) with a diamond tip helps to prevent wear. However, as tips may be fragile, meters should be used with care. Where can I buy a suitable meter? Several suitable meters are currently available. What is Rz and why does the system use it?

Quoted from HSE. Open the original on hse.gov.uk

Key points

This guidance covers selecting and using roughness meters for the SAT, which relies on accurate information about floor-surface microroughness. It recommends a portable, robust meter with Rz as the roughness parameter, μm as the unit, a 0.8mm cut-off, a 4mm traverse length and a 90 degree, 5mm radius diamond-tipped stylus. Meters should be used with care because stylus tips may be fragile. Rz Surface Microroughness is a useful and reliable indicator of floor-surface slipperiness in wet conditions. Meters should not be used on wet or contaminated surfaces, or on extremely rough surfaces, carpets or other textile floor coverings. Contaminated areas should be cleaned effectively before testing, and operation should follow the manufacturer's guidance because temperature or humidity extremes can affect some meters.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejsze wytyczne dotyczą wyboru i używania mierników chropowatości na potrzeby SAT, który opiera się na dokładnych informacjach o mikroskopowej chropowatości powierzchni podłogi. Zaleca się przenośny, wytrzymały miernik z Rz jako parametrem chropowatości, μm jako jednostką, odcięciem 0.8mm, długością przesuwu 4mm oraz diamentową końcówką pomiarową o kącie 90 stopni i promieniu 5mm. Mierników należy używać ostrożnie, ponieważ końcówki mogą być delikatne. Mikroskopowa chropowatość powierzchni Rz jest użytecznym i wiarygodnym wskaźnikiem śliskości powierzchni podłogi w warunkach mokrych. Mierników nie należy używać na mokrych lub zanieczyszczonych powierzchniach ani na powierzchniach wyjątkowo chropowatych, dywanach lub innych tekstylnych pokryciach podłogowych. Zanieczyszczone obszary należy skutecznie wyczyścić przed badaniem, a obsługa powinna odbywać się zgodnie z wytycznymi producenta, ponieważ skrajne temperatury lub wilgotność mogą wpływać na działanie niektórych mierników.

Machine-translated summary (Romanian)

Aceste îndrumări acoperă selectarea și utilizarea aparatelor de măsurare a rugozității pentru SAT, care se bazează pe informații exacte despre microrugozitatea suprafeței podelei. Se recomandă un aparat portabil și robust, cu Rz ca parametru de rugozitate, μm ca unitate, o limită de tăiere de 0.8mm, o lungime de parcurgere de 4mm și un vârf cu diamant, de 90 de grade și cu raza de 5mm. Aparatele trebuie utilizate cu grijă, deoarece vârfurile pot fi fragile. Microrugozitatea suprafeței Rz este un indicator util și fiabil al alunecării suprafețelor podelelor în condiții umede. Aparatele nu trebuie utilizate pe suprafețe umede sau contaminate, ori pe suprafețe extrem de rugoase, covoare sau alte acoperiri textile pentru podele. Zonele contaminate trebuie curățate eficient înainte de testare, iar utilizarea trebuie să urmeze îndrumările producătorului, deoarece temperaturile sau umiditatea extreme pot afecta funcționarea unor aparate.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.