HSE web guidance, updated 22 July 2025
Meter
Current. Last checked with HSE on 17 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 22 July 2025
- HSE's date
- 22 July 2025
- Last checked
- 17 November 2026
The passage you were sent
What it says, in HSE's own words
Please select the from the following questions: My meter does not work. What should I do? My meter is not calibrated by an accredited organisation. Will this affect the validity of the readings? My meter is generating 'over-range' readings. What should I do? My meter does not work. What should I do? The majority of the meters found in the UK are not user-serviceable. Once simple checks have been undertaken (such as battery condition etc.) in line with the manufacturer's instructions, it is recommended that the manufacturer/supplier be contacted.
Alternatively, HSL may be contacted for advice. My meter is not calibrated by an accredited organisation. Will this affect the validity of the readings? It is still possible to use the SAT with a non-calibrated roughness meter. However, this is not recommended as the production of spurious roughness information may lead to the production of inaccurate slip risk data by the SAT. If an uncalibrated meter is used, then a note will automatically be made on the results printout generated by the tool.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The guidance covers checks and action for roughness meters used with the SAT. Most meters in the UK are not user-serviceable. After simple checks, such as battery condition, have been undertaken in line with the manufacturer’s instructions, it is recommended that the manufacturer or supplier be contacted; alternatively, HSL may be contacted for advice. The SAT can be used with a non-calibrated roughness meter, but this is not recommended because spurious roughness information may produce inaccurate slip risk data, and the results printout will note its use. Full calibration of the meter and supplied calibration foil should normally be undertaken annually, while the check foil should be used daily during periods of use.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Wytyczne obejmują sprawdzanie i działania dotyczące mierników chropowatości używanych z SAT. Większość mierników w Wielkiej Brytanii nie może być serwisowana przez użytkownika. Po przeprowadzeniu prostych kontroli, takich jak sprawdzenie stanu baterii, zgodnie z instrukcjami producenta, zaleca się skontaktowanie z producentem lub dostawcą; alternatywnie można skontaktować się z HSL w celu uzyskania porady. SAT można używać z nieskalibrowanym miernikiem chropowatości, ale nie jest to zalecane, ponieważ pozorne informacje o chropowatości mogą prowadzić do niedokładnych danych o ryzyku poślizgu, a wydruk wyników odnotuje jego użycie. Pełną kalibrację miernika i dostarczonej folii kalibracyjnej należy zwykle przeprowadzać corocznie, a folii kontrolnej należy używać codziennie w okresach użytkowania.
Machine-translated summary (Romanian)
Îndrumările acoperă verificările și acțiunile pentru aparatele de măsurare a rugozității folosite cu SAT. Majoritatea aparatelor din Regatul Unit nu pot fi reparate de utilizator. După efectuarea verificărilor simple, cum ar fi starea bateriei, conform instrucțiunilor producătorului, se recomandă contactarea producătorului sau furnizorului; alternativ, HSL poate fi contactat pentru recomandări. SAT poate fi folosit cu un aparat de măsurare a rugozității necalibrat, dar acest lucru nu este recomandat, deoarece informațiile eronate despre rugozitate pot produce date inexacte privind riscul de alunecare, iar imprimarea rezultatelor va consemna folosirea acestuia. Calibrarea completă a aparatului și a foliei de calibrare furnizate ar trebui efectuată în mod normal anual, iar folia de verificare ar trebui folosită zilnic în perioadele de utilizare.
Check your RAMS against this document
Related guidance
Tell me when HSE changes this
Tell me when HSE changes Meter. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.