HSE web guidance, updated 22 July 2025
Floor wear
Current. Last checked with HSE on 12 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 22 July 2025
- HSE's date
- 22 July 2025
- Last checked
- 12 November 2026
The passage you were sent
What it says, in HSE's own words
Please select the from the following questions: I want to use the SAT on a floor that was installed many years ago. Will this affect the results? How does wear affect the slip resistance of a floor? I want to use the SAT on a floor that was installed many years ago. Will this affect the results? The age of the floor surface under examination will not directly affect the results produced by the SAT. However, the results produced are likely to be dissimilar to those produced from an equivalent new flooring due to the wear of the older flooring.
As wear affects the microroughness of flooring materials, the wear characteristics of the test flooring will be automatically taken into account by the SAT through the roughness data supplied. Flooring materials often wear preferentially in areas of high pedestrian traffic (ie in doorways or narrow corridors). If this is the case, a number of repeated assessments may be undertaken around the test site. How does wear affect the slip resistance of a floor? Different floors can react in different ways to the natural wear which occurs through pedestrian use.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This page covers how floor wear affects results from the SAT and the slip resistance of floor surfaces. The age of a floor surface will not directly affect SAT results, but results are likely to differ from those for equivalent new flooring because of wear. Wear affects the microroughness of flooring materials, and the SAT automatically takes the test flooring’s wear characteristics into account through the roughness data supplied. Flooring materials often wear preferentially in areas of high pedestrian traffic, such as doorways or narrow corridors; where this occurs, a number of repeated assessments may be undertaken around the test site. Floors generally become smoother through wear, although some may become gradually more slip resistant. Floors are recommended to be assessed once every 3 to 6 months, depending on pedestrian traffic.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta strona omawia wpływ zużycia podłogi na wyniki SAT oraz odporność powierzchni podłogi na poślizg. Wiek powierzchni podłogi nie wpłynie bezpośrednio na wyniki SAT, lecz wyniki prawdopodobnie będą różnić się od wyników dotyczących równoważnej nowej posadzki z powodu zużycia. Zużycie wpływa na mikroszorstkość materiałów podłogowych, a SAT automatycznie uwzględnia charakterystykę zużycia badanej podłogi za pośrednictwem dostarczonych danych dotyczących szorstkości. Materiały podłogowe często zużywają się w większym stopniu w miejscach o dużym natężeniu ruchu pieszego, takich jak wejścia lub wąskie korytarze; gdy tak się dzieje, wokół miejsca badania można przeprowadzić szereg powtórnych ocen. Podłogi generalnie stają się gładsze wskutek zużycia, chociaż niektóre mogą stopniowo zyskiwać większą odporność na poślizg. Zaleca się ocenianie podłóg raz na 3 to 6 miesięcy, zależnie od natężenia ruchu pieszego.
Machine-translated summary (Romanian)
Această pagină prezintă modul în care uzura podelei afectează rezultatele SAT și rezistența la alunecare a suprafețelor podelei. Vechimea suprafeței podelei nu va afecta direct rezultatele SAT, însă rezultatele vor fi probabil diferite de cele pentru o pardoseală nouă echivalentă din cauza uzurii. Uzura afectează microrugozitatea materialelor pentru pardoseli, iar SAT ține automat seama de caracteristicile de uzură ale pardoselii testate prin intermediul datelor de rugozitate furnizate. Materialele pentru pardoseli se uzează adesea cu precădere în zonele cu trafic pietonal intens, cum ar fi intrările sau coridoarele înguste; în acest caz, se pot efectua o serie de evaluări repetate în jurul locului de testare. Podelele devin în general mai netede prin uzură, deși unele pot deveni treptat mai rezistente la alunecare. Se recomandă ca podelele să fie evaluate o dată la 3 to 6 luni, în funcție de traficul pietonal.
Check your RAMS against this document
Related guidance
Tell me when HSE changes this
Tell me when HSE changes Floor wear. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.