KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 6 March 2025

Reducing stone cutting noise

Current. Last checked with HSE on 11 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 6 March 2025
HSE's date
6 March 2025
Last checked
11 November 2026

What it says, in HSE's own words

The problem Stone cutting When using conventional steel saws in stonemasonry, A-weighted noise levels of over 102 dB can be generated from the impact of each blade segment on the stone and by the mechanical vibrations exciting the blade as it rotates at high speed. The solution Standard blade (left), laminated blade (centre), laser-cut blade (right) A number of alternative blades are available. One range includes a laminated blade which absorbs much of the energy by damping the mechanical resonance.
The internal construction consists of a layer of copper, sandwiched between two skins of high-tensile steel. The laminated blades are not generally as strong as traditional solid steel blades and are intended for step cutting only. Another product uses a steel blade which has a series of S-shaped cuts made by laser. These cuts are sealed by cold-rolling the blade. Copper rivets may be added at the base of each gullet. This treatment restricts the propagation of sound waves through the surface of the blade.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This page covers reducing noise from stone cutting with alternative saw blades. Conventional steel saws can generate A-weighted noise levels of over 102 dB through blade impact and mechanical vibration. Laminated blades use a copper layer between two high-tensile steel skins to damp mechanical resonance and are intended for step cutting only; they are not generally as strong as traditional solid steel blades. Laser-cut blades have S-shaped cuts sealed by cold-rolling, which restricts sound-wave propagation, and are sufficiently robust for full-depth cutting. Maintenance of both blade types requires no special skills beyond those needed for traditional blades. Measurements showed reductions of between 10 to 12 dB compared with conventional blade cutting.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Ta strona dotyczy ograniczania hałasu podczas cięcia kamienia za pomocą alternatywnych tarcz tnących. Konwencjonalne piły stalowe mogą generować ważone poziomem A poziomy hałasu przekraczające 102 dB wskutek uderzania segmentu tarczy oraz drgań mechanicznych. Tarcze laminowane wykorzystują warstwę miedzi pomiędzy dwiema powłokami stali o wysokiej wytrzymałości na rozciąganie, aby tłumić rezonans mechaniczny, i są przeznaczone wyłącznie do cięcia stopniowego; na ogół nie są tak wytrzymałe jak tradycyjne tarcze z litej stali. Tarcze cięte laserowo mają wycięcia w kształcie litery S uszczelnione przez walcowanie na zimno, co ogranicza rozchodzenie się fal dźwiękowych, i są wystarczająco wytrzymałe do cięcia na pełną głębokość. Konserwacja obu typów tarcz nie wymaga specjalnych umiejętności wykraczających poza te potrzebne przy tradycyjnych tarczach. Pomiary wykazały zmniejszenie o między 10 a 12 dB w porównaniu z konwencjonalnym cięciem tarczą.

Machine-translated summary (Romanian)

Această pagină tratează reducerea zgomotului produs la tăierea pietrei cu discuri de ferăstrău alternative. Ferăstraiele convenționale din oțel pot genera niveluri de zgomot ponderate A de peste 102 dB prin impactul segmentului fiecărei lame și prin vibrațiile mecanice. Discurile laminate folosesc un strat de cupru între două învelișuri de oțel de înaltă rezistență la tracțiune pentru a amortiza rezonanța mecanică și sunt destinate numai tăierii în trepte; în general, nu sunt la fel de rezistente ca discurile tradiționale din oțel masiv. Discurile tăiate cu laser au tăieturi în formă de S sigilate prin laminare la rece, ceea ce restricționează propagarea undelor sonore, și sunt suficient de robuste pentru tăierea pe toată adâncimea. Întreținerea ambelor tipuri de discuri nu necesită competențe speciale în afara celor necesare pentru discurile tradiționale. Măsurătorile au arătat o reducere de între 10 și 12 dB față de tăierea cu un disc convențional.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.