HSE web guidance, updated 14 March 2025
Air turbulence
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 14 March 2025
- HSE's date
- 14 March 2025
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
[extracted from L108 "Controlling noise at work" p 57] Slotted table lips on a planer reduce air turbulence and noise. When any rotating part such as a fan blade or a woodworking cutter block passes close to a stationary part of the machine, noise is produced. If the distance between the rotating part and the stationary part is increased, the noise level will be reduced.
Also if cutter blocks are fitted which have helical blades, the smooth transition of the curved cutting edge next to the stationary table instead of the abrupt impact of a normal blade will reduce the noise considerably. CAUTION: Gaps between stationary and rotating parts of machinery are dangerous. You should not alter gaps without ensuring that the machinery can be used without risks to safety. Reduced-noise cutter block. When air flows past an object or over sharp edges, turbulence is caused which produces noise.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The guidance explains how air turbulence and the movement of rotating parts can produce noise in machinery. When a rotating part, such as a fan blade or woodworking cutter block, passes close to a stationary part, increasing the distance between them reduces the noise level. Cutter blocks with helical blades can also reduce noise considerably. Smooth edges, removing voids or rounding edges, and allowing air to flow smoothly through ducts and pipes can reduce noise created by turbulence and tones from cavities. Gaps between stationary and rotating machinery parts are dangerous. You should not alter gaps without ensuring that the machinery can be used without risks to safety.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Wytyczne wyjaśniają, jak turbulencje powietrza i ruch obracających się części mogą powodować hałas w maszynach. Gdy obracająca się część, taka jak łopatka wentylatora lub blok tnący do obróbki drewna, przechodzi blisko części nieruchomej, zwiększenie odległości między nimi zmniejsza poziom hałasu. Bloki tnące z ostrzami śrubowymi również mogą znacznie zmniejszyć hałas. Gładkie krawędzie, usuwanie pustych przestrzeni lub zaokrąglanie krawędzi oraz umożliwienie płynnego przepływu powietrza przez kanały i rury mogą zmniejszyć hałas powodowany przez turbulencje i tony powstające w zagłębieniach. Szczeliny między nieruchomymi i obracającymi się częściami maszyn są niebezpieczne. Nie należy zmieniać szczelin bez zapewnienia, że maszyny można używać bez zagrożeń dla bezpieczeństwa.
Machine-translated summary (Romanian)
Îndrumările explică modul în care turbulențele aerului și mișcarea pieselor rotative pot produce zgomot în utilaje. Atunci când o piesă rotativă, cum ar fi o pală de ventilator sau un bloc de tăiere pentru prelucrarea lemnului, trece aproape de o piesă staționară, mărirea distanței dintre ele reduce nivelul zgomotului. Blocurile de tăiere cu lame elicoidale pot, de asemenea, să reducă considerabil zgomotul. Muchiile netede, îndepărtarea golurilor sau rotunjirea muchiilor și permiterea curgerii line a aerului prin conducte și țevi pot reduce zgomotul creat de turbulențe și tonurile produse de cavități. Spațiile dintre piesele staționare și rotative ale utilajelor sunt periculoase. Nu trebuie să modificați spațiile fără să vă asigurați că utilajele pot fi utilizate fără riscuri pentru siguranță.
Check your RAMS against this document
Related guidance
- Wood working control risks
- Removing woodworking machine noise by adjustment
- General information
- Concrete and cement control risks
Tell me when HSE changes this
Tell me when HSE changes Air turbulence. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.