HSE web guidance, updated 6 March 2025
Reducing noise in crew cab road vehicles
Current. Last checked with HSE on 12 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 6 March 2025
- HSE's date
- 6 March 2025
- Last checked
- 12 November 2026
The passage you were sent
What it says, in HSE's own words
The problem Vehicle crew cab Noise levels in crew-carrying road vehicles can be high enough to cause concern. In some untrimmed vehicles such as refuse collectors, A-weighted levels have been measured as high as 103 to 105 dB. One local authority operating a fleet of such vehicles commissioned a noise reduction exercise to determine whether it would be reasonably practicable to effect a significant reduction without compromising the vehicle's road worthiness. The primary source of noise came from the engine.
However, the cabin was also subjected to noise from the transmission and hydraulic power pack coming through the relatively lightweight sheet steel floor and toe plates and the rear bulkhead. The solution Vehicle crew cab This secondary noise was reduced by securing a lead/fibreglass laminate sheet to the underside of all floor, toe and bulkhead surfaces. Reverberation was also reduced by lining the roof and all available internal surfaces of the doors and the front and rear bulkheads with an expanded acoustic polyurethane foam faced with a washable porous PVC film. The cost About £1300.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This page describes a noise-reduction exercise in vehicle crew cabs. Noise levels in some untrimmed crew-carrying road vehicles, such as refuse collectors, were measured as high as 103 to 105 dB, with the engine identified as the primary source and additional noise coming through the floor, toe plates and rear bulkhead from the transmission and hydraulic power pack. Secondary noise was reduced by securing a lead/fibreglass laminate sheet to the underside of these surfaces. Reverberation was reduced by lining the roof and available internal door and bulkhead surfaces with expanded acoustic polyurethane foam faced with washable porous PVC film. The cost was about £1300, and noise reductions of 4 to 9 dB were achieved.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta strona opisuje działania mające na celu ograniczenie hałasu w kabinach załogi pojazdów. W niektórych nieizolowanych pojazdach drogowych przewożących załogę, takich jak śmieciarki, zmierzono poziomy sięgające 103 do 105 dB, przy czym silnik wskazano jako główne źródło, a dodatkowy hałas przedostawał się przez podłogę, płyty podstopnicowe i tylną przegrodę ze skrzyni biegów i hydraulicznego zespołu napędowego. Hałas wtórny ograniczono, mocując arkusz laminatu ołowiowo-włóknistego do spodniej strony tych powierzchni. Pogłos ograniczono, wykładając dach oraz dostępne wewnętrzne powierzchnie drzwi i przegród ekspandowaną akustyczną pianką poliuretanową pokrytą zmywalną porowatą folią PVC. Koszt wyniósł około £1300, a uzyskane ograniczenie hałasu wyniosło 4 do 9 dB.
Machine-translated summary (Romanian)
Această pagină descrie un exercițiu de reducere a zgomotului în cabinele echipajului vehiculelor. Niveluri de zgomot de până la 103 până la 105 dB au fost măsurate în unele vehicule rutiere neizolate care transportă echipaje, cum ar fi vehiculele de colectare a deșeurilor, motorul fiind identificat ca sursa principală, iar zgomotul suplimentar pătrunzând prin podea, plăcile de la picioare și peretele despărțitor posterior de la transmisie și grupul hidraulic de putere. Zgomotul secundar a fost redus prin fixarea unei foi laminate din plumb și fibră de sticlă pe partea inferioară a acestor suprafețe. Reverberația a fost redusă prin căptușirea acoperișului și a suprafețelor interioare disponibile ale ușilor și pereților despărțitori cu spumă poliuretanică acustică expandată, acoperită cu o folie PVC poroasă lavabilă. Costul a fost de aproximativ £1300, iar reduceri ale zgomotului de 4 până la 9 dB au fost obținute.
Check your RAMS against this document
Related guidance
- Reducing noise in a dump truck
- Reducing stone cutting noise
- Reducing stone cutting noise
- Concrete and cement control risks
Tell me when HSE changes this
Tell me when HSE changes Reducing noise in crew cab road vehicles. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.