HSE web guidance, updated 30 September 2024
Testing and monitoring your water system for legionella
Current. Last checked with HSE on 16 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 30 September 2024
- HSE's date
- 30 September 2024
- Last checked
- 16 November 2026
The passage you were sent
What it says, in HSE's own words
This page explains when and how to test your water system to ensure legionella is not present. There is also advice on what you must do when asking someone else to test or monitor your system for you. How often you should test water for legionella The regularity of your checks depends on your system and the outcome of your risk assessment . For open systems, such as cooling towers, evaporative condensers and spa pools etc, routine testing should be carried out at least quarterly.
However, there may be circumstances were more frequent sampling may be required. For hot and cold water systems, which are generally enclosed (not open to the elements), significant contamination is less likely than in cooling towers etc. Microbiological monitoring is therefore not usually required.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This page explains when and how to test a water system to ensure legionella is not present, including what to do when someone else tests or monitors it. Check frequency depends on the system and risk assessment outcome. For open systems, routine testing should be carried out at least quarterly, with more frequent sampling possible. Microbiological monitoring of generally enclosed hot and cold water systems is not usually required, but testing may be necessary where control effectiveness is doubtful or recommended temperatures or disinfection concentrations are not consistently achieved. Where monitoring is appropriate, sampling should follow British Standard BS7592, biocide should be neutralised where possible, and samples should be tested by a UKAS-accredited laboratory participating in a water microbiology proficiency testing scheme. The laboratory should apply a detection limit of no more than 100 legionella bacteria per litre for culture-based methods.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta strona wyjaśnia, kiedy i jak badać system wodny, aby zapewnić, że legionella nie występuje, w tym co robić, gdy ktoś inny bada lub monitoruje system. Częstotliwość kontroli zależy od systemu i wyniku oceny ryzyka. W przypadku systemów otwartych rutynowe badania powinny być przeprowadzane co najmniej kwartalnie, przy czym możliwe jest częstsze pobieranie próbek. Monitorowanie mikrobiologiczne ogólnie zamkniętych systemów ciepłej i zimnej wody zwykle nie jest wymagane, ale badanie może być konieczne, gdy skuteczność systemu kontroli budzi wątpliwości lub zalecane temperatury albo stężenia dezynfekcji nie są osiągane w sposób stały. Gdy monitorowanie jest właściwe, pobieranie próbek powinno odbywać się zgodnie z British Standard BS7592, biocyd powinien być w miarę możliwości neutralizowany, a próbki powinny być badane przez laboratorium akredytowane przez UKAS, uczestniczące w programie badań biegłości mikrobiologii wody. Laboratorium powinno stosować granicę wykrywalności nie większą niż 100 bakterii legionella na litr w przypadku metod opartych na hodowli.
Machine-translated summary (Romanian)
Această pagină explică când și cum trebuie testat un sistem de apă pentru a se asigura că legionella nu este prezentă, inclusiv ce trebuie făcut când altcineva testează sau monitorizează sistemul. Frecvența verificărilor depinde de sistem și de rezultatul evaluării riscurilor. Pentru sistemele deschise, testarea de rutină ar trebui efectuată cel puțin trimestrial, fiind posibilă o eșantionare mai frecventă. Monitorizarea microbiologică a sistemelor de apă caldă și rece, în general închise, nu este de obicei necesară, dar testarea poate fi necesară atunci când eficacitatea regimului de control este îndoielnică sau temperaturile recomandate ori concentrațiile de dezinfecție nu sunt atinse în mod constant. Atunci când monitorizarea este adecvată, prelevarea probelor ar trebui efectuată în conformitate cu British Standard BS7592, biocidul ar trebui neutralizat, dacă este posibil, iar probele ar trebui testate de un laborator acreditat UKAS care participă la o schemă de testare a competenței în microbiologia apei. Laboratorul ar trebui să aplice o limită de detecție de cel mult 100 de bacterii legionella per litru pentru metodele bazate pe cultură.
Check your RAMS against this document
Related guidance
- Legionella and landlords' responsibilities
- Other systems that can create a risk of legionella
- Hot and cold water systems
- Legionella risks in your workplace
Tell me when HSE changes this
Tell me when HSE changes Testing and monitoring your water system for legionella. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.