HSE web guidance, updated 28 October 2024
Hot and cold water systems
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 28 October 2024
- HSE's date
- 28 October 2024
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
Systems to supply hot and cold water services range in size, scale and complexity. All can present foreseeable risk of exposure to legionella. Temperature control is the traditional strategy for reducing the risk of legionella in hot and cold water systems. Cold water systems should be maintained, where possible, at a temperature below 20°C.
Hot water should be stored at least at 60°C and distributed so that it reaches a temperature of 50°C (55°C in healthcare premises) within 1 minute at the outlets. This page will help you understand how to control risks for different systems, depending on the size and type of building. It also explains how you can use HSE’s guidance to control the risk of legionella in hot and cold water systems. Understanding your water system Before assessing the risks, you need to understand the type of water system and its operation.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The page explains how hot and cold water systems can present a foreseeable risk of exposure to legionella and how temperature and other controls can reduce it. Cold water systems should, where possible, be maintained below 20°C; hot water should be stored at least at 60°C and distributed to reach 50°C, or 55°C in healthcare premises, within 1 minute at outlets. Employers, people in control of premises and landlords of residential accommodation must take a risk assessment and review it after significant changes, considering staff susceptibility. Risks of scalding must be assessed and controlled; a Type 3 thermostatic mixing valve must be fitted where required to prevent water exceeding 44°C.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Strona wyjaśnia, jak systemy ciepłej i zimnej wody mogą stwarzać możliwe do przewidzenia ryzyko narażenia na legionellę oraz jak temperatura i inne środki kontroli mogą je zmniejszyć. Systemy zimnej wody powinny, w miarę możliwości, być utrzymywane poniżej 20°C; ciepła woda powinna być przechowywana w temperaturze co najmniej 60°C i rozprowadzana tak, aby osiągała 50°C lub 55°C w pomieszczeniach opieki zdrowotnej, w ciągu 1 minuty w punktach poboru. Pracodawcy, osoby sprawujące kontrolę nad pomieszczeniami i wynajmujący pomieszczenia mieszkalne muszą przeprowadzić ocenę ryzyka i dokonać jej przeglądu po istotnych zmianach, uwzględniając podatność pracowników. Należy ocenić i kontrolować ryzyko oparzenia; w razie potrzeby należy zamontować termostatyczny zawór mieszający typu 3, aby zapobiec przekroczeniu przez wodę temperatury 44°C.
Machine-translated summary (Romanian)
Pagina explică modul în care sistemele de apă caldă și rece pot prezenta un risc previzibil de expunere la legionella și modul în care temperatura și alte măsuri de control îl pot reduce. Sistemele de apă rece trebuie, acolo unde este posibil, menținute sub 20°C; apa caldă trebuie stocată la cel puțin 60°C și distribuită astfel încât să atingă 50°C sau 55°C în spațiile medicale, în decurs de 1 minut la punctele de distribuție. Angajatorii, persoanele care controlează spațiile și proprietarii spațiilor rezidențiale trebuie să efectueze o evaluare a riscurilor și să o revizuiască după schimbări semnificative, luând în considerare susceptibilitatea personalului. Riscurile de opărire trebuie evaluate și controlate; acolo unde este necesar, trebuie montată o vană de amestec termostatică de tip 3 pentru a împiedica apa să depășească 44°C.
Check your RAMS against this document
Related guidance
- Hot and cold water systems - things to consider
- Testing and monitoring your water system for legionella
- Legionella and landlords' responsibilities
- Other systems that can create a risk of legionella
Tell me when HSE changes this
Tell me when HSE changes Hot and cold water systems. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.