HSE web guidance, updated 3 April 2025
A worker was injured when working in a live electrical panel
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 3 April 2025
- HSE's date
- 3 April 2025
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
An employee was instructed to carry out work on an electrical control panel to reverse the phases and reverse the conveyor that had blocked. The panel was still live and electrical shorting resulted in arcing and caused burns to his face and arms. He had not received training in electrical work. Action The employer was prosecuted under The Electricity at Work Regulations 1989 (No 16) and fined. Comment People who work on electrical equipment or installation must be competent to do the tasks required of them.
Competence can normally be demonstrated by an individual who has successfully completed a suitable training course, has experience in the area of work, and is able to appreciate how to reduce the risks posed by the work activity. The downloadable HSE booklet Electricity at work - safe working practices provides information on how to select and instruct competent workers.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The document describes a worker instructed to work on an electrical control panel to reverse the phases and reverse a blocked conveyor. The panel was still live, and electrical shorting caused arcing and burns to his face and arms; he had not received training in electrical work. The employer was prosecuted under The Electricity at Work Regulations 1989 (No 16) and fined. People who work on electrical equipment or installation must be competent for their tasks. Competence can normally be shown through a suitable training course, experience and the ability to appreciate how to reduce risks. HSE’s booklet Electricity at work - safe working practices provides information on selecting and instructing competent workers.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Dokument opisuje pracownika, któremu polecono pracę przy elektrycznej szafie sterowniczej w celu odwrócenia faz i odwrócenia zablokowanego przenośnika. Szafa była nadal pod napięciem, a zwarcie elektryczne spowodowało powstanie łuku elektrycznego i oparzenia jego twarzy oraz ramion; nie otrzymał szkolenia w zakresie prac elektrycznych. Pracodawca został oskarżony na podstawie The Electricity at Work Regulations 1989 (No 16) i ukarany grzywną. Osoby pracujące przy urządzeniach lub instalacjach elektrycznych muszą być kompetentne do wykonywania swoich zadań. Kompetencję można zwykle wykazać ukończeniem odpowiedniego kursu szkoleniowego, doświadczeniem oraz umiejętnością oceny, jak ograniczyć ryzyko stwarzane przez pracę. Broszura HSE Electricity at work - safe working practices zawiera informacje o doborze i instruowaniu kompetentnych pracowników.
Machine-translated summary (Romanian)
Documentul descrie un lucrător căruia i s-a cerut să lucreze la un panou electric de control pentru a inversa fazele și a inversa transportorul care se blocase. Panoul era încă sub tensiune, iar scurtcircuitarea electrică a provocat formarea unui arc electric și arsuri la față și brațe; nu primise instruire în lucrări electrice. Angajatorul a fost urmărit penal în temeiul The Electricity at Work Regulations 1989 (No 16) și amendat. Persoanele care lucrează la echipamente sau instalații electrice trebuie să fie competente pentru sarcinile care le sunt cerute. Competența poate fi demonstrată în mod normal prin absolvirea unui curs de instruire adecvat, experiență în domeniu și capacitatea de a aprecia cum pot fi reduse riscurile prezentate de activitatea de lucru. Broșura HSE Electricity at work - safe working practices oferă informații despre selectarea și instruirea lucrătorilor competenți.
Check your RAMS against this document
Related guidance
- Electrician was injured touching live equipment
- Electrical fitters injuries result in amputation when he believed he was working in a safe zone
- Shock received after incorrectly wiring a machine
- Employee was killed while working with poorly constructed equipment
Tell me when HSE changes this
Tell me when HSE changes A worker was injured when working in a live electrical panel. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.