HSE web guidance, updated 7 May 2026
Frequently asked questions (FAQs)
Current. Last checked with HSE on 15 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 7 May 2026
- HSE's date
- 7 May 2026
- Last checked
- 15 November 2026
The passage you were sent
What it says, in HSE's own words
Is it safe? Which is safer; alternating current (AC) or direct current (DC)? Alternating current (AC) and direct current (DC) have slightly different effects on the human body, but both are dangerous above a certain voltage. The risk of injury changes according to the frequency of the AC, and it is common for DC to have an AC component (called ripple).
Someone with special equipment can measure this, but the effect on a particular person is very difficult to predict as it depends upon a large number of factors. As a consequence you should always avoid contact with high-voltage electrical conductors, regardless of the type of electrical current they are carrying. More detailed technical information on electrical injury is given in the standard BS PD 6519 'Guide to the effects of current on human beings and livestock - Part 1: General aspects'. Everyone gets a 'belt' from electricity every now and then, don't they?
Quoted from HSE. Open the original on hse.gov.uk
Key points
High-voltage conductors should always be avoided, and equipment should be securely isolated and checked dead before work starts. Electrical equipment and installations should be inspected and tested often enough to prevent danger, with competent people carrying out specialist inspection and testing. Live working must only be done after it has been determined that it is unreasonable to work dead, with precautions to reduce risk so far as is reasonably practicable.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Należy zawsze unikać przewodów wysokiego napięcia, a sprzęt należy bezpiecznie odłączyć i sprawdzić, czy jest wyłączony spod napięcia, przed rozpoczęciem pracy. Sprzęt i instalacje elektryczne należy kontrolować i testować wystarczająco często, aby zapobiec zagrożeniu, przy czym kompetentne osoby powinny wykonywać specjalistyczne kontrole i testy. Praca pod napięciem może być wykonywana wyłącznie po ustaleniu, że praca bez napięcia jest nierozsądna, z zastosowaniem środków ostrożności ograniczających ryzyko tak dalece, jak jest to racjonalnie wykonalne.
Machine-translated summary (Romanian)
Conductorii de înaltă tensiune trebuie evitați întotdeauna, iar echipamentele trebuie izolate în siguranță și verificate pentru a confirma că sunt scoase de sub tensiune înainte de începerea lucrului. Echipamentele și instalațiile electrice trebuie inspectate și testate suficient de des pentru a preveni pericolul, iar persoanele competente trebuie să efectueze inspecțiile și testările specializate. Lucrul sub tensiune trebuie efectuat numai după ce s-a stabilit că este nerezonabil ca lucrul să fie efectuat fără tensiune, cu măsuri de precauție pentru reducerea riscului în măsura în care este rezonabil practicabil.
Check your RAMS against this document
Related guidance
- PAT (Portable appliance testing) - HSE's answers to popular questions
- Grid-scale battery energy storage systems
- Work using electrically powered equipment
- Electricity in potentially explosive atmospheres
Tell me when HSE changes this
Tell me when HSE changes Frequently asked questions (FAQs). A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.