KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 3 April 2025

Work using electrically powered equipment

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 3 April 2025
HSE's date
3 April 2025
Last checked
13 November 2026

What it says, in HSE's own words

You should make sure that electrical equipment used for work is safe. Here are a list of actions that should be taken to ensure this is so: Perform a risk assessment to identify the hazards, the risks arising from those hazards, and the control measures you should use. Check that the electrical equipment is suitable for the work and way in which it is going to be used. Check that the electrical equipment is in good condition . The HSE booklet 'Maintaining portable and transportable electrical equipment' will help you do this.
Check that the equipment is suitable for the electrical supply with which it is going to be used, and the electrical supply is safe. It is often beneficial to use a Residual Current Device (RCD) between the electrical supply and the equipment. Make sure that the user of the equipment is trained to use it safely and can keep others safe. Make sure the user knows which personal protective equipment to wear, how to use it, and make sure they do.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Electrical equipment used for work should be safe. The guidance covers risk assessment, choosing equipment suitable for the work, environment and electrical supply, checking its condition, training users, and ensuring they know and use the required personal protective equipment. Equipment should be switched off and unplugged before checks; plugs, fuses, cables, covers, burn marks and trailing wires should be checked, and damaged cables replaced by a competent person. Equipment that may be unsafe should not be used until checked. For construction, user checks are 110 V - Weekly and 230 V mains - Daily/every shift; formal visual inspections are 110 V - Monthly and 230 V - weekly; combined inspection and tests are 110 V - Before first use on site then 3 monthly and 230 V mains - Before first use on site then monthly. An RCD should have a tripping current of not more than 30 milliamps (mA).

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Sprzęt elektryczny używany do pracy powinien być bezpieczny. Wytyczne obejmują ocenę ryzyka, wybór sprzętu odpowiedniego do pracy, środowiska i zasilania elektrycznego, sprawdzanie jego stanu, szkolenie użytkowników oraz zapewnienie, że znają i stosują wymagane środki ochrony indywidualnej. Sprzęt powinien być wyłączony i odłączony od gniazda przed sprawdzeniem; należy sprawdzić wtyczki, bezpieczniki, kable, obudowy, ślady przypalenia i luźne przewody, a uszkodzone kable powinny zostać wymienione przez kompetentną osobę. Sprzętu, który może być niebezpieczny, nie powinno się używać do czasu jego sprawdzenia. W budownictwie kontrole użytkownika to 110 V - Weekly i 230 V mains - Daily/every shift; formalne kontrole wzrokowe to 110 V - Monthly i 230 V - weekly; połączone kontrole i badania to 110 V - Before first use on site then 3 monthly i 230 V mains - Before first use on site then monthly. RCD powinien mieć prąd zadziałania nie większy niż 30 milliamps (mA).

Machine-translated summary (Romanian)

Echipamentele electrice utilizate la lucru ar trebui să fie sigure. Îndrumările acoperă evaluarea riscurilor, alegerea echipamentelor potrivite pentru lucrare, mediu și alimentarea electrică, verificarea stării acestora, instruirea utilizatorilor și asigurarea faptului că aceștia cunosc și folosesc echipamentul individual de protecție necesar. Echipamentele ar trebui oprite și scoase din priză înainte de verificări; prizele, siguranțele, cablurile, carcasele, urmele de arsuri și firele suspendate ar trebui verificate, iar cablurile deteriorate ar trebui înlocuite de o persoană competentă. Echipamentele care pot fi nesigure nu ar trebui utilizate până când nu sunt verificate. Pentru construcții, verificările utilizatorului sunt 110 V - Weekly și 230 V mains - Daily/every shift; inspecțiile vizuale formale sunt 110 V - Monthly și 230 V - weekly; inspecțiile și testele combinate sunt 110 V - Before first use on site then 3 monthly și 230 V mains - Before first use on site then monthly. Un RCD ar trebui să aibă un curent de declanșare de cel mult 30 milliamps (mA).

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.