HSE web guidance, updated 12 November 2024
Construction dust: Soft strip demolition
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 12 November 2024
- HSE's date
- 12 November 2024
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
Soft strip demolition can produce high levels of dust. Effective control is necessary because this work can be high risk. This page tells you how to control the risk and why. You also need to be aware of the general information on construction dust . What you must do Follow the Assess, Control and Review model . Pay particular attention to the following things: Assess Identify and assess : Soft strip demolition can produce high dust levels. The risk will depend on how much material you are removing and what it contains.
It will be higher risk if it contains silica or wood dust. Anyone breathing in this dust cloud will be affected. Those doing the work will be particularly at risk. Follow the control steps below. Control Prevent : Think about limiting the risks before work starts by: carefully planning the work limiting the number of people that need to be in the work area screening off areas to prevent dust spreading Control : Even if you minimise some of the dust this way, soft strip demolition can still produce dust.
Quoted from HSE. Open the original on hse.gov.uk
Key points
Soft strip demolition can produce high levels of dust, so effective control is necessary. Follow the Assess, Control and Review model: identify and assess the dust risk; plan the work carefully, limit the number of people in the work area and screen off areas to prevent spreading. Use water suppression or on-tool extraction where possible, and RPE with an assigned protection factor of 20, such as an FFP3 disposable mask or half mask with a P3 filter. For work over an hour without a break, consider powered RPE with the same protection. Provide ventilation, supervise controls and correct RPE use, and ensure tight-fitting masks are face-fit tested. Decide whether health surveillance is needed.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Rozbiórka miękka może powodować wysoki poziom zapylenia, dlatego konieczna jest skuteczna kontrola. Stosuj model Oceniaj, Kontroluj i Przeglądaj: zidentyfikuj i oceń ryzyko zapylenia; starannie zaplanuj pracę, ogranicz liczbę osób w obszarze pracy i odgrodź obszary, aby zapobiec rozprzestrzenianiu się pyłu. Tam, gdzie jest to możliwe, stosuj tłumienie pyłu wodą lub odciąg miejscowy, a także RPE ze wskaźnikiem przypisanej ochrony wynoszącym 20, na przykład jednorazową maskę FFP3 lub półmaskę z filtrem P3. W przypadku pracy trwającej ponad godzinę bez przerwy rozważ zasilane RPE z taką samą ochroną. Zapewnij wentylację, nadzoruj stosowanie środków kontroli i prawidłowe używanie RPE oraz dopilnuj, aby szczelnie dopasowane maski były sprawdzane pod względem dopasowania do twarzy. Zdecyduj, czy potrzebny jest program nadzoru zdrowotnego.
Machine-translated summary (Romanian)
Demolarea de finisare poate produce niveluri ridicate de praf, astfel că este necesar un control eficient. Urmați modelul Evaluează, Controlează și Revizuiește: identificați și evaluați riscul de praf; planificați cu atenție lucrările, limitați numărul de persoane din zona de lucru și separați zonele pentru a preveni răspândirea prafului. Folosiți suprimarea cu apă sau extracția la unealtă acolo unde este posibil și RPE cu un factor de protecție atribuit de 20, de exemplu o mască de unică folosință FFP3 sau o semimască cu filtru P3. Pentru lucrări de peste o oră fără pauză, luați în considerare RPE alimentat cu aceeași protecție. Asigurați ventilația, supravegheați utilizarea controalelor și folosirea corectă a RPE și asigurați-vă că măștile etanșe sunt testate pentru potrivirea pe față. Decideți dacă este necesar un program de supraveghere a sănătății.
Check your RAMS against this document
Related guidance
- Construction hazardous substances: Lead
- Construction dust
- Construction dust: Sanding taped and covered plasterboard joints
- Construction dust: Chasing concrete and raking mortar
Tell me when HSE changes this
Tell me when HSE changes Construction dust: Soft strip demolition. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.