HSE web guidance, updated 12 January 2026
Construction dust: Cutting roofing tiles
Current. Last checked with HSE on 14 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 12 January 2026
- HSE's date
- 12 January 2026
- Last checked
- 14 November 2026
The passage you were sent
What it says, in HSE's own words
Using cut-off saws on roofing tiles can produce very high levels of silica containing dust. Effective control is necessary because this work is high risk. This page tells you how to control the risk and why. You also need to be aware of the general information on construction dust . What you must do Follow the Assess, Control and Review model . Pay particular attention to the following things: Assess Identify and assess : Using cut-off saws on roofing tiles can produce very high levels of silica containing dust.
Anyone breathing in this dust cloud will be affected. Those using or very close to the cut-off saw will be particularly at risk. Follow the control steps below. Control Prevent : Think about limiting the amount of dust you could make before work starts by: allowing for ½ or 1½ size tiles during design. Also consider using dry valleys natural slate and fibre cement slates do not need cutting with power tools. Use the correct hammers and cutters instead.
Quoted from HSE. Open the original on hse.gov.uk
Key points
Using cut-off saws on roofing tiles can produce very high levels of silica-containing dust, so this page explains how to assess, control and review the risk. Controls include reducing cutting through design and use of hand tools where possible, planning a dedicated cutting area on the scaffolding, and controlling slurry and access. Where a saw is used, use a hand-held cut-off saw with a water suppression attachment connected to a pressurised water container, and wear respiratory protective equipment (RPE) with an assigned protection factor of 20. Tight-fitting masks need fit testing. Supervise use of controls and correct RPE wearing, maintain equipment and RPE, and consider health surveillance unless exposure is well below the recommended exposure limit.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Używanie pilarek tarczowych do cięcia dachówek może powodować bardzo wysokie poziomy pyłu zawierającego krzemionkę, dlatego ta strona wyjaśnia, jak oceniać, kontrolować i przeglądać ryzyko. Środki kontroli obejmują ograniczanie cięcia poprzez projektowanie oraz stosowanie narzędzi ręcznych, gdy jest to możliwe, zaplanowanie wyznaczonego miejsca cięcia na rusztowaniu, a także kontrolowanie szlamu i dostępu. Gdy używana jest piła, należy używać ręcznej pilarki tarczowej z nasadką do tłumienia pyłu wodą, podłączoną do zbiornika wody pod ciśnieniem, oraz nosić sprzęt ochrony dróg oddechowych (RPE) o przypisanym współczynniku ochrony 20. Dopasowywane ściśle maski wymagają testowania dopasowania. Należy nadzorować stosowanie środków kontroli i prawidłowe noszenie RPE, konserwować sprzęt i RPE oraz rozważyć program nadzoru zdrowotnego, chyba że narażenie jest znacznie niższe od zalecanego limitu narażenia.
Machine-translated summary (Romanian)
Folosirea ferăstraielor de tăiere pentru țigle de acoperiș poate produce niveluri foarte ridicate de praf care conține silice, astfel încât această pagină explică modul de evaluare, control și revizuire a riscului. Măsurile de control includ reducerea tăierii prin proiectare și folosirea uneltelor manuale acolo unde este posibil, planificarea unei zone dedicate pentru tăiere pe schelă și controlul șlamului și al accesului. Atunci când se folosește un ferăstrău, folosiți un ferăstrău manual de tăiere cu un dispozitiv de suprimare a prafului cu apă, conectat la un recipient de apă presurizat, și purtați echipament de protecție respiratorie (RPE) cu un factor de protecție atribuit de 20. Măștile etanșe necesită testarea potrivirii. Supravegheați folosirea controalelor și purtarea corectă a RPE, întrețineți echipamentul și RPE și luați în considerare un program de supraveghere medicală, cu excepția cazului în care expunerea este cu mult sub limita recomandată de expunere.
Check your RAMS against this document
Related guidance
- Construction dust: Cutting and sanding wood
- Construction dust: Cutting paving blocks kerbs and flags
- Construction hazardous substances: Lead
- Construction dust
Tell me when HSE changes this
Tell me when HSE changes Construction dust: Cutting roofing tiles. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.