KASQSite safety, in the crew's language
Start free

Silica dust toolbox talk

A complete toolbox talk on silica dust for a construction site in Great Britain, with a sign-on sheet to print, the HSE guidance it draws on, and three common questions answered from HSE guidance, with the source.

This talk in: English · Polski · Română

The talk comes from the KASQ Toolbox talks tool (11 November 2026, example company AUDIT Builders Ltd). The text is as the tool printed it.

The guidance quoted on this page is from the Health and Safety Executive (HSE), the workplace health and safety regulator for Great Britain.

The talk

Silica dust: control it at source

AUDIT Builders Ltd · Delivery date: 11 November 2026 · Delivered by: AUDIT Supervisor
Toolbox talk

Silica dust containing respirable crystalline silica is classified as a carcinogen. Uncontrolled cut-off saw cutting can produce very high peak exposures. This talk does not cover the specific controls for your task; those arrangements must be taken from the site RAMS.

Key points

  1. Before work starts, assess the material and process and select controls that adequately protect respiratory health.
  2. Limit dust at source by using lower-energy equipment, reducing cuts, or having material cut off-site where those options suit the task.
  3. Use water suppression or on-tool extraction where suitable; for extraction, select an H or M class unit and ensure its flow rate is right for the work.
  4. Keep the extraction hood as close as possible to the work, secure both hose connections, and empty the unit regularly using the correct disposable waste bags.
  5. Where the task requires RPE with an APF of 20, use suitable RPE such as an FFP3 disposable mask or half mask with a P3 filter; fit-test tight-fitting masks.
  6. Check controls before use, repair or replace damaged parts straight away, and carry out formal extraction maintenance checks at least once a week.

Do

  • Use the dust controls provided and follow the correct work method.
  • Keep extraction equipment clean and free from blockages.
  • Use RPE correctly where the task assessment requires it.
  • Report damaged or faulty dust-control equipment immediately.

Don't

  • Do not dry-cut where the task requires water suppression or extraction.
  • Do not use a general commercial vacuum instead of a suitable H or M class extraction unit.
  • Do not empty disposable extraction bags for recycling.
  • Do not start work with damaged or faulty dust-control equipment.

Ask the crew

  1. What should we do before starting work?
  2. Which methods can limit dust at source?
  3. What class of extraction unit may be needed?
  4. How close should the extraction hood be to the work?
  5. When must tight-fitting RPE be fit-tested?
Before you deliver this talk
  • Check this talk against the site's own rules for the task — where the RAMS, permits or method statement are stricter, they win.
  • Tell the crew where the current inspection records are kept and who to raise concerns with before starting.
  • If practical, deliver it at the work area and point at the real thing.

Sign-on sheet

Sign-on

Toolbox talk: Silica dust: control it at source · Talk date: 11 November 2026 · by AUDIT Supervisor · for AUDIT Builders Ltd

By signing I confirm that I attended this toolbox talk, that I understood it, and that I will raise any concern about this work with my supervisor before starting.

Podpisując, potwierdzam, że uczestniczyłem(-am) w tej rozmowie, zrozumiałem(-am) ją i każdą wątpliwość dotyczącą tej pracy zgłoszę przełożonemu przed rozpoczęciem.

Prin semnătură confirm că am participat la această discuție, că am înțeles-o și că voi ridica orice îngrijorare legată de această lucrare superiorului meu înainte de a începe.

#NameTradeSignature
1
2
3
4
5
6
Checked sources: HSG201: Controlling exposure to stone dust (HSE) · Controlling construction dust with on-tool extraction CIS69 (HSE) · Construction dust: Cutting paving blocks kerbs and flags (HSE) · Construction dust (HSE)
Made with KASQ · kasq.uk — guidance only; it does not replace site rules, RAMS, permits or a competent person. KASQ is an APPSTAR LTD product, not affiliated with the Health and Safety Executive. Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0.

The sheet carries the example company and date. To print one with your own company, date and presenter, make the talk in the tool.

Common questions

What happens if you breathe in silica dust?

The fine dust is known as respirable crystalline silica (RCS) and is too fine to see with normal lighting.

Heavy and prolonged exposure to RCS can cause lung cancer and other serious respiratory diseases.

Silicosis can cause severe breathing problems and increases the risk of lung infections.

Source: HSE, “Cancer and construction: Silica”. Read on 11 November 2026.

What mask do I need for silica dust?

For cutting paving blocks, kerbs and flags with a cut-off saw, after water suppression and on-tool extraction, HSE lists:

Respiratory Protective Equipment (RPE) – you also need RPE with an assigned protection factor of 20 (eg FFP3 disposable mask or half mask with a P3 filter). Make sure it is compatible with other items of personal protective equipment being worn. Fit testing is needed for tight fitting masks.

Source: HSE, “Construction dust: Cutting paving blocks kerbs and flags”. Read on 11 November 2026.

What class of vacuum (extraction unit) do I need for silica dust?

For cutting paving blocks, kerbs and flags with a cut-off saw, HSE says:

On-tool extraction – use a specially adapted equipment with on-tool extraction. Select an H or M class extraction unit. Make sure the extraction flow rate is right for the work. Hose connections should be tight fitting and secure without obvious leaks.

Source: HSE, “Construction dust: Cutting paving blocks kerbs and flags”. Read on 11 November 2026.

Sources named in this talk

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0.