HSE web guidance, updated 18 August 2023
Securing loads
Current. Last checked with HSE on 16 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 18 August 2023
- HSE's date
- 18 August 2023
- Last checked
- 16 November 2026
The passage you were sent
What it says, in HSE's own words
Key messages Employers and duty holders must make sure that loads are safely anchored to the vehicle and that the vehicle is strong enough to take the strain. Questions to ask Are the anchor points designed to spread the weight and forces they receive into the main structure of the vehicle? Do the anchor points have moving parts? If so, they should move as little as possible when loaded by a restraint, as any movement will seriously reduce how effective the restraint is. Are the anchor points compatible with the securing equipment likely to be used?
Do the attachments meet the relevant British Standards? For example, eye bolts to BS 427819 and shackles to BS 3551 Will the anchor points be firmly attached either directly to the chassis or to a metal crosspiece or outrigger? Anchor points that are secured only to wooden members are unlikely to be strong enough.
Quoted from HSE. Open the original on hse.gov.uk
Key points
Employers and duty holders must make sure that loads are safely anchored to the vehicle and that the vehicle is strong enough to take the strain. Anchor points should be designed to spread the weight and forces into the vehicle’s main structure, move as little as possible when loaded by a restraint, and be compatible with the securing equipment likely to be used. Attachments should meet the relevant British Standards, such as eye bolts to BS 427819 and shackles to BS 3551. Worn or damaged systems should be replaced in sets wherever reasonable.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Pracodawcy i osoby mające obowiązki muszą dopilnować, aby ładunki były bezpiecznie zakotwiczone do pojazdu oraz aby pojazd był wystarczająco wytrzymały, by przenieść obciążenie. Punkty kotwiczenia powinny być zaprojektowane tak, aby rozkładać ciężar i siły na główną konstrukcję pojazdu, poruszać się jak najmniej po obciążeniu urządzeniem mocującym oraz być kompatybilne ze sprzętem mocującym, który prawdopodobnie będzie używany. Elementy mocujące powinny spełniać odpowiednie normy brytyjskie, takie jak śruby oczkowe zgodne z BS 427819 i szakle zgodne z BS 3551. Zużyte lub uszkodzone systemy powinny być wymieniane w zestawach, wszędzie tam, gdzie jest to rozsądne.
Machine-translated summary (Romanian)
Angajatorii și persoanele cu responsabilități trebuie să se asigure că încărcăturile sunt ancorate în siguranță de vehicul și că vehiculul este suficient de rezistent pentru a suporta solicitarea. Punctele de ancorare ar trebui să fie proiectate pentru a distribui greutatea și forțele în structura principală a vehiculului, să se miște cât mai puțin atunci când sunt încărcate de un dispozitiv de fixare și să fie compatibile cu echipamentul de fixare care este probabil să fie utilizat. Elementele de atașare ar trebui să respecte standardele britanice relevante, cum ar fi șuruburile cu ochi conform BS 427819 și bridele conform BS 3551. Sistemele uzate sau deteriorate ar trebui înlocuite în seturi ori de câte ori este rezonabil.
Check your RAMS against this document
Related guidance
- The right vehicle for the job
- Site-based access to vehicles
- Inspection, maintenance and repair
- Preventing falls from vehicles
Tell me when HSE changes this
Tell me when HSE changes Securing loads. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.