KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 16 November 2021

Traffic routes

Current. Last checked with HSE on 14 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 16 November 2021
HSE's date
16 November 2021
Last checked
14 November 2026

What it says, in HSE's own words

Key messages By law: Every traffic route in a workplace must have a driving surface that is suitable for its purpose. The surface of any traffic route must not be so uneven, potholed, sloped or slippery that any person could slip, trip or fall. Questions to ask When you plan a traffic route, your risk assessment should include answers to these questions: Where does the traffic route go? What potential hazards are on the route? Is the road surface suitable for the load? Does the route slope?
… fuel or chemical tanks or pipes; gates or barriers; overhead electricity cables; any unprotected edge from which vehicles could fall, or where they could become unstable, such as unfenced edges of elevated weighbridges, loading bays or excavations; anything that might collapse or be left in a dangerous condition if a vehicle hits it; or anything that might catch on or dislodge a load. To avoid these hazards: Minimise road and route junctions. Provide clear signed warning of any height or width restriction – both in advance and at the obstruction itself.

Quoted from HSE. Open the original on hse.gov.uk

Key points

Every traffic route in a workplace must have a driving surface suitable for its purpose, and it must not be so uneven, potholed, sloped or slippery that anyone could slip, trip or fall. When planning a route, the risk assessment should consider where it goes, potential hazards, whether the surface suits the load and whether the route slopes. Junctions should be minimised, restrictions clearly signed and dangerous obstructions protected. Take care with loads on slopes, avoid slopes steeper than 1 in 10, and for road tanker loading and unloading a maximum gradient of 1 in 30 is recommended.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Każda droga komunikacyjna w miejscu pracy musi mieć nawierzchnię odpowiednią do jej przeznaczenia i nie może być tak nierówna, pełna wybojów, pochyła lub śliska, aby ktokolwiek mógł się poślizgnąć, potknąć lub upaść. Podczas planowania drogi ocena ryzyka powinna uwzględniać, dokąd prowadzi, potencjalne zagrożenia, to, czy nawierzchnia jest odpowiednia dla ładunku oraz czy droga jest pochyła. Należy ograniczać liczbę skrzyżowań, wyraźnie oznakować ograniczenia i zabezpieczać niebezpieczne przeszkody. Należy uważać na ładunki na pochyłościach, unikać pochyłości bardziej stromych niż 1 in 10, a przy załadunku i rozładunku cystern drogowych zalecane jest maksymalne nachylenie 1 in 30.

Machine-translated summary (Romanian)

Fiecare rută de circulație dintr-un loc de muncă trebuie să aibă o suprafață de rulare potrivită scopului său și nu trebuie să fie atât de denivelată, plină de gropi, înclinată sau alunecoasă încât orice persoană să poată aluneca, se împiedica sau cădea. La planificarea unei rute, evaluarea riscurilor ar trebui să ia în considerare unde duce aceasta, pericolele potențiale, dacă suprafața este potrivită pentru încărcătură și dacă ruta este înclinată. Intersecțiile ar trebui reduse la minimum, restricțiile semnalizate clar, iar obstacolele periculoase protejate. Aveți grijă la încărcăturile de pe pante, evitați pantele mai abrupte de 1 in 10, iar pentru încărcarea și descărcarea cisternelor rutiere se recomandă o înclinare maximă de 1 in 30.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.