KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 14 December 2021

Speed

Current. Last checked with HSE on 17 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 14 December 2021
HSE's date
14 December 2021
Last checked
17 November 2026

What it says, in HSE's own words

Key messages Limiting the speed that vehicles move around the workplace is an important part of controlling traffic. The best way to do this is to use fixed features that mean drivers cannot move too quickly. Speed limits are also used widely, but they are not always appropriate or enforceable Questions to ask Your risk assessment should include answers to these questions: What is the safest speed for vehicles to move around our workplace? What can we do to slow down the traffic? How can we set and enforce speed limits?
Examples of fixed traffic calming measures include: Speed humps ; passing places; narrowed routes (using, for example bollards, raised kerbs, chicanes, built-in routeside features, sometimes called 'pinch points'); and 'rumble' devices (such as rumble strips, rumble areas or jiggle bars). Traffic-calming measures should be signed and clearly visible. Many features can be lit or made reflective. Take care when you are deciding where to use traffic-calming features, because they can sometimes increase risks (for example, by affecting the stability of vehicles or less secure loads).

Quoted from HSE. Open the original on hse.gov.uk

Key points

Limiting vehicle speed around the workplace is an important part of controlling traffic. Fixed features are described as the best way to stop drivers moving too quickly, while speed limits are widely used but may not be appropriate or enforceable. Risk assessments should consider the safest speed, ways to slow traffic, and how limits can be set and enforced. Measures include speed humps, passing places, narrowed routes and ‘rumble’ devices; they should be signed and clearly visible, with care taken because they can increase risks. Speed humps normally slow vehicles to an average of around 15 miles per hour, should be repeated at intervals, and should not be used within 15 m of a junction or bend. Limits should suit vehicles, loads, surfaces, route layout, hazards and nearby work.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Ograniczanie prędkości pojazdów w miejscu pracy jest ważną częścią kontroli ruchu. Stałe elementy opisano jako najlepszy sposób zapobiegania zbyt szybkiej jeździe kierowców, podczas gdy ograniczenia prędkości są powszechnie stosowane, ale mogą być nieodpowiednie lub niewykonalne. Ocena ryzyka powinna uwzględniać najbezpieczniejszą prędkość, sposoby spowalniania ruchu oraz to, jak można ustalać i egzekwować ograniczenia. Środki obejmują progi zwalniające, mijanki, zwężone trasy i urządzenia „rumble”; powinny być oznakowane i wyraźnie widoczne, przy czym należy zachować ostrożność, ponieważ mogą zwiększać ryzyko. Progi zwalniające zwykle spowalniają pojazdy do średnio około 15 miles per hour, powinny być powtarzane w odstępach i nie powinny być stosowane w odległości 15 m od skrzyżowania lub zakrętu. Ograniczenia powinny odpowiadać pojazdom, ładunkom, nawierzchniom, układowi trasy, zagrożeniom i pracom w pobliżu.

Machine-translated summary (Romanian)

Limitarea vitezei vehiculelor în jurul locului de muncă este o parte importantă a controlului traficului. Elementele fixe sunt descrise ca fiind cea mai bună modalitate de a împiedica șoferii să circule prea repede, în timp ce limitele de viteză sunt utilizate pe scară largă, dar este posibil să nu fie adecvate sau aplicabile. Evaluarea riscurilor ar trebui să ia în considerare viteza cea mai sigură, modalitățile de încetinire a traficului și modul în care limitele pot fi stabilite și puse în aplicare. Măsurile includ limitatoare de viteză, locuri de trecere, trasee îngustate și dispozitive „rumble”; acestea ar trebui semnalizate și clar vizibile, fiind necesară atenție deoarece pot crește riscurile. Limitatoarele de viteză încetinesc de obicei vehiculele la o medie de aproximativ 15 miles per hour, ar trebui repetate la intervale și nu ar trebui utilizate la mai puțin de 15 m de o intersecție sau curbă. Limitele ar trebui să fie adecvate vehiculelor, încărcăturilor, suprafețelor, configurației traseului, pericolelor și lucrărilor din apropiere.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.