HSE web guidance, updated 4 April 2025
Stoneworkers: Frequently asked questions
Current. Last checked with HSE on 11 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 4 April 2025
- HSE's date
- 4 April 2025
- Last checked
- 11 November 2026
The passage you were sent
What it says, in HSE's own words
How can I reduce vibration on a stone hammer? Vibration is worst on the traditional in-line stone hammers without anti-vibration features - typically around 20m/s2 on the tool body and may be even worse on the chisel. It is usually lower on D-type handles and lowest on pistol grip hammers. This level of vibration exposes stonemasons to high risks of hand-arm vibration syndrome (HAVS) after a very short period of use. Air pressure supplied to stone hammers has an effect on the vibration generated.
Lower air pressure generally results in lower vibration on the tool body, but the tools may also be lower powered. Always refer to manufacturers' instructions for the correct operating pressure. Make sure that you do not use the tool at a higher operating pressure than is necessary for the job. Not all the stone hammers generate the same risks from vibration as the traditional ones. Vibration reduced stone hammers are available and may be suitable. The vibration from these tools are generally lower than the traditional in-line stone hammers.
Quoted from HSE. Open the original on hse.gov.uk
Check your RAMS against this document
Related guidance
- Silica dust
- Getting started
- Stoneworkers: Health and safety topics
- Handling and storage of large sheet stone slabs
Tell me when HSE changes this
Tell me when HSE changes Stoneworkers: Frequently asked questions. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.