HSE web guidance, updated 2 June 2021
Slipping on dust in machinery workshop
Current. Last checked with HSE on 12 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 2 June 2021
- HSE's date
- 2 June 2021
- Last checked
- 12 November 2026
The passage you were sent
What it says, in HSE's own words
The slip risks resulting from machining dust became a point of discussion when a HSE inspector slipped on the workshop floor during a routine health and safety visit. The inspector was not hurt but the company did agree that processing dust finding its way onto the floor in that area did make it rather slippery. Workers too said that the walkways and working area floors were very slippery, even more vulnerable were visitors to the workshops (such as staff from the offices) as they were often taken unawares by the slippery nature of the floors.
Carbon dust on the floor The painted concrete floors of the workshop could not be completely prevented from becoming contaminated with fine dust (up to 10 microns) from the cutting and machining of graphite components. Extract ventilation at machines was effective up to a point but the filtration systems did not seem to be able to capture as much of the dust as was needed allowing some to be deposited on surfaces. This was compounded by the system of emptying by hand the bags holding the filtered out dust; the manual process resulted in some dust being re-released and contaminating walkways.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The document describes slip risks from machining dust in a machinery workshop, where carbon dust from cutting and machining graphite components contaminated painted concrete floors and walkways. Workers reported very slippery floors, while visitors were particularly vulnerable because they were often taken unawares. The company tested microroughness and slip resistance, then treated walkways and work areas with gritty particles in a two-part epoxy, giving about 33 microns of surface roughness and good resistance when clean or coated with dust. Floor audits form part of scheduled safety checks, and industrial grade dry vacuum cleaners are supplemented by periodic mechanical scrubbing. The company also planned a centralised local exhaust ventilation system, with filtration outside the workshop, to reduce dust and recontamination.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Dokument opisuje ryzyko poślizgnięcia się spowodowane pyłem z obróbki w warsztacie maszynowym, gdzie pył węglowy z cięcia i obróbki elementów grafitowych zanieczyszczał malowane betonowe posadzki i przejścia. Pracownicy zgłaszali bardzo śliskie podłogi, a odwiedzający byli szczególnie narażeni, ponieważ często byli zaskakiwani ich śliskością. Firma zbadała mikroszorstkość i odporność na poślizg, a następnie pokryła przejścia i stanowiska pracy dwuskładnikową żywicą epoksydową z ziarnistymi cząstkami, zapewniającą około 33 mikronów szorstkości powierzchni i dobrą odporność zarówno na czystej powierzchni, jak i pokrytej pyłem. Audyty podłóg są częścią zaplanowanych kontroli bezpieczeństwa, a przemysłowe odkurzacze na sucho są uzupełniane okresowym szorowaniem mechanicznym. Firma zaplanowała również scentralizowany system miejscowej wentylacji wyciągowej, z filtracją poza warsztatem, aby ograniczyć pył i ponowne zanieczyszczenie.
Machine-translated summary (Romanian)
Documentul descrie riscurile de alunecare cauzate de praful rezultat din prelucrare într-un atelier de utilaje, unde praful de carbon provenit din tăierea și prelucrarea componentelor din grafit contamina pardoselile din beton vopsit și căile de acces. Lucrătorii au raportat pardoseli foarte alunecoase, iar vizitatorii erau deosebit de vulnerabili, deoarece erau adesea luați prin surprindere de caracterul alunecos al acestora. Compania a testat microrugozitatea și rezistența la alunecare, apoi a tratat căile de acces și zonele de lucru cu particule abrazive într-un epoxidic bicomponent, oferind aproximativ 33 de microni de rugozitate a suprafeței și o rezistență bună atât când era curată, cât și când era acoperită cu praf. Auditurile pardoselilor fac parte din verificările de siguranță programate, iar aspiratoarele industriale pentru curățare uscată sunt completate de curățare mecanică periodică. Compania a planificat și un sistem centralizat de ventilație locală de exhaustare, cu filtrarea amplasată în afara atelierului, pentru a reduce praful și recontaminarea.
Check your RAMS against this document
Related guidance
- Oily floors in engineering workshop
- Japanese 5S management system
- Knowing when and where hazards and risks arise plays an important part in incident reduction
- New floor required a different cleaning regime, but did anyone tell the cleaners
Tell me when HSE changes this
Tell me when HSE changes Slipping on dust in machinery workshop. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.