HSE web guidance, updated 28 January 2026
Manufacture or supply of pressure systems
Current in our copy of 21 July 2026. Not yet re-read at HSE.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 28 January 2026
- HSE's date
- 28 January 2026
- Our copy
- 21 July 2026
The passage you were sent
What it says, in HSE's own words
Manufacturers Subject to certain exclusions , the Pressure Equipment (Safety) Regulations 2016 (on legislation.gov.uk) make it an offence for a manufacturer or their authorised representative to place on the market, put into service or otherwise supply pressure equipment and assemblies above 0.5 bar unless they: are safe meet essential safety requirements covering design, manufacture and testing satisfy appropriate conformity assessment procedures and are accompanied by a declaration of conformity …
… carry the appropriate conformity assessment marking and other required information in English are labelled with the (manufacturers) name, registered trade name or trademark and address, and the type, batch or serial number are accompanied by adequate instructions and safety information Pressure equipment and assemblies within the scope of Pressure Equipment (Safety) Regulations but below specified pressure x volume thresholds must: be safe be designed and manufactured according to 'sound engineering practice' be accompanied by adequate instructions for use bear the appropriate markings …
Quoted from HSE. Open the original on hse.gov.uk
Key points
Equipment below specified pressure x volume thresholds must be safe, follow 'sound engineering practice', include instructions for use and bear appropriate markings. Distributors must take due care, verify documents, markings and identification, and not supply equipment they believe is not in conformity. Exclusions are listed.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Urządzenia poniżej określonych progów ciśnienia x objętości muszą być bezpieczne, być zgodne z „uznaną praktyką inżynierską”, zawierać instrukcje użytkowania i mieć odpowiednie oznakowanie. Dystrybutorzy muszą zachować należytą staranność, sprawdzić dokumenty, oznakowania i identyfikację oraz nie dostarczać urządzeń, co do których sądzą, że są niezgodne. Wyłączenia są wymienione.
Machine-translated summary (Romanian)
Echipamentele sub pragurile specificate de presiune x volum trebuie să fie sigure, să fie proiectate și fabricate conform „practicii inginerești solide”, să fie însoțite de instrucțiuni de utilizare și să poarte marcajele corespunzătoare. Distribuitorii trebuie să exercite diligența necesară, să verifice documentele, marcajele și identificarea și să nu furnizeze echipamente despre care au motive să creadă că nu sunt conforme. Excluderile sunt enumerate.
Check your RAMS against this document
Related guidance
- Pressure Systems Safety Regulations 2000 (PSSR)
- Pressure Equipment (Safety) Regulations
- Exemption from Pressure Systems Safety Regulations 2000 (PSSR)
- Using pressure systems
Tell me when HSE changes this
Tell me when HSE changes Manufacture or supply of pressure systems. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.