KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 25 March 2025

Doing a push/pull risk assessment

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 25 March 2025
HSE's date
25 March 2025
Last checked
13 November 2026

What it says, in HSE's own words

How do I know if I need to assess the risk in more detail? Look at the Appendix to guidance booklet L23 'Manual Handling' . This sets out ways to help you decide how detailed your pushing and pulling risk assessments need to be: A simple risk filter based on you assessing the posture of the person carrying out the task. If the person can walk upright while pushing or pulling without having to exert much force, then the task is very likely to be low risk. A more detailed assessment using the RAPP tool .
You may choose to use other tools not published by HSE instead. A full risk assessment taking account of all the factors in Schedule 1 of MHOR. This is needed when there are risk factors that the earlier stages do not address. To ensure that the key risk factors from pushing and pulling operations are identified, HSE has produced a pushing and pulling risk assessment checklist. There is also an example checklist to help with your risk assessments.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This guidance explains how to assess risks from pushing and pulling loads and how to decide the level of detail needed. It describes a simple risk filter, the RAPP tool or other tools, and a full risk assessment taking account of all the factors in Schedule 1 of MHOR. HSE provides a checklist and example checklist. Guideline figures are 20 kg (ie about 200 Newtons) for men and 15 kg (ie about 150 Newtons) for women when stopping or starting a load, and 10 kg (ie about 100 Newtons) and 7 kg (ie about 70 Newtons) for keeping a load in motion. These are not weight limits or approved figures. Measurements can use a spring balance or specialised electronic dynamometer.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejsze wytyczne wyjaśniają, jak oceniać ryzyko związane z pchaniem i ciągnięciem ładunków oraz jak określić wymagany poziom szczegółowości. Opisują prosty filtr ryzyka, narzędzie RAPP lub inne narzędzia oraz pełną ocenę ryzyka uwzględniającą wszystkie czynniki z Schedule 1 MHOR. HSE udostępnia listę kontrolną i przykładową listę kontrolną. Wartości orientacyjne wynoszą 20 kg (tj. około 200 Newtonów) dla mężczyzn i 15 kg (tj. około 150 Newtonów) dla kobiet przy zatrzymywaniu lub rozpoczynaniu przemieszczania ładunku oraz 10 kg (tj. około 100 Newtonów) i 7 kg (tj. około 70 Newtonów) przy utrzymywaniu ładunku w ruchu. Nie są to limity masy ani zatwierdzone wartości. Pomiary można wykonywać za pomocą wagi sprężynowej lub specjalistycznego elektronicznego dynamometru.

Machine-translated summary (Romanian)

Aceste îndrumări explică modul de evaluare a riscurilor asociate împingerii și tragerii încărcăturilor și modul de stabilire a nivelului de detaliu necesar. Ele descriu un filtru simplu de risc, instrumentul RAPP sau alte instrumente și o evaluare completă a riscului care ține cont de toți factorii din Schedule 1 al MHOR. HSE pune la dispoziție o listă de verificare și o listă de verificare exemplificativă. Valorile orientative sunt 20 kg (adică aproximativ 200 Newtoni) pentru bărbați și 15 kg (adică aproximativ 150 Newtoni) pentru femei la oprirea sau pornirea unei încărcături și 10 kg (adică aproximativ 100 Newtoni) și 7 kg (adică aproximativ 70 Newtoni) pentru menținerea unei încărcături în mișcare. Acestea nu sunt limite de greutate sau valori aprobate. Măsurătorile pot fi efectuate cu un cântar cu arc sau cu un dinamometru electronic specializat.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.