HSE web guidance, updated 1 April 2025
Values in the summary table and what they mean
Current. Last checked with HSE on 16 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 1 April 2025
- HSE's date
- 1 April 2025
- Last checked
- 16 November 2026
The passage you were sent
What it says, in HSE's own words
Individual weights The number of lifts performed in 1 kg steps. The maximum load The colour band of this load tells you how severe the heaviest lifting task is. The 25 th percentile load The 25 th and 75 th percentile loads tell you something about how spread out are the loads that are being handled. Half of the loads are between these two values. As the loads get more variable, the difference between them gets bigger. The 25 th percentile load tells you something about the lighter loads that are being handled.
A quarter of loads weigh less than this, and three-quarters weigh more so it is mid-way between the lightest weight and the median. It's the middle point of the light half of the job. The average load (mean load) This is total weight handled divided by the total number of lifts. This is what the worker would handle if all the loads weighed the same. The colour band tells you the level of risk of the overall demands of the task. The middle load (median load) If you arrange all the weights in sequence this is the middle value. It splits the weights into a heavy half and a light half.
Quoted from HSE. Open the original on hse.gov.uk
Key points
It describes how percentile loads show the spread and lighter or heavier parts of the job. The carry factor converts total distance carried into an equivalent number of lifts and adds it to the mean value. The overall colour band and score should be entered into the “Load weight and lift/carry frequency” line of the MAC score sheet. It also defines total load handled, the total number of carries of more than 2 m distance, and total carry distance.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Opisuje, jak ciężary percentylowe pokazują rozrzut oraz lżejsze lub cięższe części pracy. Współczynnik przenoszenia przelicza całkowitą odległość przenoszenia na równoważną liczbę podniesień i dodaje ją do wartości średniej. Ogólne pasmo kolorów i wynik powinny zostać wpisane w wierszu „Masa ładunku i częstotliwość podnoszenia/przenoszenia” arkusza MAC. Definiuje także całkowity obsłużony ładunek, całkowitą liczbę przeniesień na odległość większą niż 2 m oraz całkowitą odległość przenoszenia.
Machine-translated summary (Romanian)
Descrie modul în care greutățile percentilelor arată distribuția și părțile mai ușoare sau mai grele ale lucrării. Factorul de transport transformă distanța totală parcursă cu sarcini într-un număr echivalent de ridicări și îl adaugă la valoarea medie. Banda de culoare și scorul general ar trebui introduse pe linia „Greutatea încărcăturii și frecvența ridicării/transportului” din fișa MAC. De asemenea, definește încărcătura totală manipulată, numărul total de transporturi pe o distanță mai mare de 2 m și distanța totală de transport.
Check your RAMS against this document
Related guidance
- V-MAC frequently asked questions (FAQs)
- What does the V-MAC tell you?
- Recording and using your findings
- Advantages and limitations of the V-MAC
Tell me when HSE changes this
Tell me when HSE changes Values in the summary table and what they mean. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.