HSE web guidance, updated 16 April 2025
Contractor sustains electric shock after failure to isolate power supply
Current. Last checked with HSE on 16 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 16 April 2025
- HSE's date
- 16 April 2025
- Last checked
- 16 November 2026
The passage you were sent
What it says, in HSE's own words
A self-employed contractor sustained 415 volt electric shock injuries from the bare electrical wires supplying an overhead travelling crane whilst working from a 'cherry picker' installing computer cabling. The defendant company failed to follow their procedures for safe isolation of the power supply to the crane. Action The company was prosecuted under the Health and Safety At Work etc.
Safety at Work Regulations 1992 (No 4) paragraph 1 due to the high risk of serious or fatal injuries from the energised electrical wires. This resulted in a £15,000 fine. Comment The company should have undertaken a risk assessment of the cabling activity that should have identified the hazard from the electrical wires. The company should have taken action to warn the contractor of the presence of electrical wires near where the work was being carried out.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This page describes a self-employed contractor who sustained 415 volt electric shock injuries from bare electrical wires supplying an overhead travelling crane while installing computer cabling from a ‘cherry picker’. The company failed to follow its procedures for safely isolating the crane’s power supply and was prosecuted, resulting in a £15,000 fine. The company should have carried out a risk assessment identifying the hazard, warned the contractor about nearby electrical wires, allowed work only after the power had been turned off, and ensured it remained off throughout the work. HSE’s booklet Electricity at work - safe working practices provides guidance on controlling these electrical risks.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta strona opisuje przypadek samozatrudnionego wykonawcy, który doznał obrażeń wskutek porażenia prądem o napięciu 415 voltów od nieosłoniętych przewodów elektrycznych zasilających suwnicę pomostową podczas instalowania okablowania komputerowego z podnośnika typu „cherry picker”. Firma nie przestrzegała swoich procedur bezpiecznego odłączania zasilania suwnicy i została oskarżona, co zakończyło się grzywną w wysokości £15,000. Firma powinna była przeprowadzić ocenę ryzyka wskazującą zagrożenie, ostrzec wykonawcę o znajdujących się w pobliżu przewodach elektrycznych, zezwalać na pracę dopiero po wyłączeniu zasilania oraz zapewnić, że pozostanie ono wyłączone przez cały czas pracy. Broszura HSE Electricity at work - safe working practices zawiera wytyczne dotyczące kontrolowania tych zagrożeń elektrycznych.
Machine-translated summary (Romanian)
Această pagină descrie cazul unui contractor care desfășura activități independente și care a suferit leziuni prin electrocutare la 415 volți de la firele electrice neizolate care alimentau o macara rulantă, în timp ce instala cabluri pentru calculatoare de pe un „cherry picker”. Compania nu a respectat procedurile sale pentru izolarea în condiții de siguranță a alimentării macaralei și a fost trimisă în judecată, rezultând o amendă de £15,000. Compania ar fi trebuit să efectueze o evaluare a riscurilor care să identifice pericolul, să avertizeze contractorul cu privire la firele electrice din apropiere, să permită lucrul numai după oprirea alimentării și să se asigure că aceasta a rămas oprită pe toată durata lucrului. Broșura HSE Electricity at work - safe working practices oferă îndrumări privind controlarea acestor riscuri electrice.
Check your RAMS against this document
Related guidance
- Contractor dies whilst erecting a lighting tower
- Trainee scaffolder died when scaffold tube came into contact with overhead line
- Lorry driver suffers burns
- Painters burnt whilst moving tower scaffold
Tell me when HSE changes this
Tell me when HSE changes Contractor sustains electric shock after failure to isolate power supply. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.